Aluminum scraps UBC System de-coating line
1.It can be applied for UBC chips and/or the aluminum scraps with painting de-coating. 2.It uses oxygen free heating to remove the paint and make it to the air and carbon black. 3.The decomposition gas can be condensate to make it recycling.Use its own cooling device to condensate the air to liquid and/or grease. 4.Waste gas reburning (low carbon chain). The gas can be used to burning then discharge.The generated heat can be used to make oxygen free heating through heat exchange device. 5.After the oil paint carbonization, use vibrate and friction to remove the carbon and ashes.Part of the oil paint in the form of carbon black shall be adhere on the body of UBC chips.Make the carbon black oxide and shift it to ashes. Then use vibrate and friction to remove it.
在线联系供应商
Other supplier products
 |
Multifunctional Molten Aluminum cycling transporting pump | Our company designs various kinds of molten aluminum pump, and mainly use in molten aluminum cycling transporting and lifting Characteristic: large... |
 |
SCR Urea Adblue AUS32 production line | An aqueous urea solution breaks down the NOx (NO or NO2) and NH3 into N2 and H2O in SCR system. It is composed with 32.5% high purity urea and 67.5... |
 |
aluminum Strip and Foil slitting line | Aluminum/aluminum/Steel and their alloy strip coil Material thickness:0.08-3.6mm Material width:100-1700mm Max weight:10t Strip width:25-1650mm No... |
 |
Transformer HV foil Winding Machine | The HV foil winding machine is used to wind high voltage coils for cast resin encapsulated transformers with Al or Cu foil strips. The individual A... |
 |
Automatic aluminum Robot Drossing System machine | Used to make drossing for aluminum/lead/zinc ingot casting machine. |
