.

Low Pressure Die Casting

The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push the upper surface of the liquid metal, force the liquid flow through the lift tube and gating, fill into the casting mold. The pressure is about 20~60 kPa. After full solidification, de-pressure the gas, make the unsolidified metal by gravity going back to crucible. The final casting part can be fetched when the mold is opened.

Rayforce Manufacture is a private cast metal manufacturerand pressure die casting manufacturers, we provide low pressure die casting vs high pressure die casting, low pressure casting machine, low pressure die casting process pdf, pressure die casting process pdfand etc. Want to know low pressure die casting advantagesor types of pressure die casting? Please contact us.



在线联系供应商

至: Shanxi Rayforce Manufacture Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Lost Wax Investment Casting
Lost Wax Investment Casting The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-maki...
Resin Sand Casting
Resin Sand Casting Resin sand castingis a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and so...
Sand Casting
Sand Casting Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy bot...
Metal Casting
Metal Casting Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as e...
Green Sand Casting
Green Sand Casting Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, ...
供应产品

Same products

Semi-Solid Die Casting
Semi-Solid Die Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semisolid die...
Sand Casting
Sand Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Sand casting is the most commonly applied method for casting the metal part. It suits most of the...
Resin Sand Casting
Resin Sand Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Resin sand castingis a kind of floor molding process, by mixing the resin with quartz sand and so...
Low Pressure Die Casting
Low Pressure Die Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. The low pressure die casting is to let the melted metal flow into the casting mold under a certai...
Lost Wax Investment Casting
Lost Wax Investment Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. The lost-wax casting process can differ depending on the application and the requirement, but it ...