Vacuum Die Casting

The vacuum dies casting, as this name indicates, is a casting method in which the major processes including melting, pouring, solidifying are performed inside the vacuum chamber. The vacuum is able to minimize the gas content of the product and prevent further oxidation from happening to the metal. This is a quite expansive technic, manufacturing the special alloy steel and oxidate-like titanium casting part can use this method to achieve a very high specification requirement.

Vacuum Die Casting Process

The vacuum dies casting is a further modified technic to vacuum casting. It is a die-casting method but the main process performs after a certain degree of vacuum building up. The degree of vacuum is about to be 50~80 kPa. In practice, there are 2 major kinds of methods for vacuum die casting:

Using a vacuum cover seal the mold. The cover takes the whole mold closed, and pumps out the air inside, then does the vacuum die casting work.

The vacuum is created with the help of the mold parting surface. There is a specifically designed air vent groove in the mold which connected to the vacuum system. When the injection plunger closes the pouring gate, the air pump works to create the vacuum to a certain degree, then the vacuum die casting works could be conducted.

Vacuum Die Casting VS Traditional Casting

Compared with traditional casting, the same thing is: both are made by pouring molten or semi-molten metal into the mold, and then the required part is obtained by cooling and solidifying the metal.

Differences between vacuum die casting and traditional casting.

In the die-casting process, after pouring, before the metal liquid enters the mold, it enters the pressure chamber and then is pressurized and injected into the mold. This makes the filling speed of die casting faster than ordinary gravity casting.

In the process of vacuum die casting, there will be the process of pressurization and pressure-holding, by applying pressure, which makes the denseness of the metal inside after solidification better than the traditional casting parts.

Advantages of Vacuum Die Casting

Vacuum die casting molding is a physical molding method, which combines vacuum technology with sand casting developed by casting manufacturing company, relying on plastic film to seal the cavity surface and the back of the sand mold. With the help of vacuum pumping to generate negative pressure, it will result in the pressure difference inside and outside the sand mold so that the mold sand is tightly formed.

After placing the sand core, closing the mold, casting, waiting for the casting to solidify, lifting the negative pressure, or stopping pumping, the mold sand will then collapse and get the casting.

According to the current field of application, vacuum die casting can be mainly divided into vacuum sealed mold making (V method) and solid vacuum casting (FV method). The advantages are:

Moderate vacuum, high die cavity tightness and high casting quality.

Vacuum casting with computer simulation of mold flow analysis can predict the generation of casting defects, for the design of the mold making scheme, can significantly save time, and improve production efficiency.

As a professional foundry manufacturer,We provide metal casting china, sodium silicate sand casting, vacuum assisted high pressure die casting, vacuum pressure casting, etc. Want to know more, contact us.

Other supplier products

	Grey Cast Iron Casting	The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron is the most common an...
	Aluminum Casting	Aluminum is a lightweight metal with silvery-white color. Because of its chemical features, aluminum never exists in the metallic form in nature. B...
	Metal Casting	Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as e...
	Lost Wax Investment Casting	The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-maki...
	Die casting	Die Casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the proc...

供应产品

Same products

	METAL BRACKETS	卖方: JCL Precision Part Co.Ltd.	Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu...
	陶瓷型芯注射机	卖方: 秦皇岛埃孚科技有限公司	陶瓷型芯注射机主要用于形状复杂，高品质、高精度铸件的陶瓷型芯的成型。该设备通过吸收国内外先进制造技术和精铸行业的自身特点，研制开发成功。 合模力：35T-100T
	压蜡机	卖方: 秦皇岛埃孚科技有限公司	注蜡机用于精密铸造生产中蜡模的制作。合模力最大 ：10T-150T
	全自动脱蜡釜	卖方: 秦皇岛埃孚科技有限公司	脱蜡釜，是精铸生产中的型壳脱蜡专用设备 内腔尺寸: Φ1000×1200mm/ Φ1200×1500mm/ Φ1400×1600mm
	CNC TURNING	卖方: Baoji Haiqiao Industrial & Trading Co., Ltd.	As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas...