CNC waterjet cutter for stone cutting
Specification of EAAK CNCwaterjet cnc cutter :(as follows)
| Model |
EK2030R |
| X Y axis Working size |
2000mm*3000mm |
| Z working height |
150mm |
| Cutting Pressure |
380Mpa 30kw UHP pump |
| Control accuracy |
0.01mm |
| Cutting accuracy |
0.1-0.2mm |
| Repositioning Accuracy |
0.05mm |
| Max cutting thickness |
300mm(depends on materials) |
| Max. moving speed |
6000mm/min |
| Power supply |
380V 50Hz |
| Environmental temperature |
-10-50°C |
| Max flow rate |
3.7L/min |
| Max oil discharge |
206L/min |
| Max delivery capacity of oil pump |
106L/min |
| Control system |
Ncstudio (Shanghai) software IPC controller |
| CAD/CAM software |
AutoCAD,ArtCAM |
| Drive motor |
Japan Yaskawa servo drive motor |
Parameters ofCNC waterjetcutter working on different materials such as glass,metal,stone(as follows)
| Materials |
Thickness |
Cutting speed (mm/min) |
| 380Mpa |
420Mpa |
600Mpa |
| Normal glass cutting |
6 mm |
1400-1500 |
2100-2250 |
2520-2700 |
| 8 mm |
690-800 |
1035-1200 |
1242-1440 |
| 19mm |
400-500 |
600-750 |
950-1150 |
| Granite panel cutting |
20mm |
260-300 |
390-450 |
468-540 |
| 30mm |
170-200 |
255-300 |
306-360 |
| Porcelain tile cutting |
10mm |
900-1000 |
1350-1500 |
1620-1800 |
| Marble panel cutting |
10mm |
600-900 |
900-1350 |
1080-1620 |
| 20mm |
350-400 |
526-600 |
630-720 |
| 30mm |
260-300 |
390-450 |
468-540 |
| Laminating glass cutting |
21mm |
490-600 |
735-900 |
882-1080 |
| Sponge and foam cutting |
20mm |
6000-7000 |
9000-10500 |
|
| 50mm |
2600-3000 |
3900-4500 |
4680-5400 |
| 80mm |
1600-2000 |
2400-3000 |
2880-3600 |
| Steel plate cutting |
10mm |
170-220 |
255-330 |
306-396 |
| 20mm |
75-100 |
113-150 |
135-180 |
| 30mm |
15-30 |
22-45 |
27-54 |
| Stainless steel plate cutting |
1 mm |
1000-1200 |
1500-1800 |
1800-2160 |
| 3 mm |
500-600 |
750-900 |
900-1080 |
| 6 mm |
240-300 |
360-450 |
432-540 |
| 10mm |
150-180 |
225-270 |
270-324 |
| 16mm |
85-100 |
128-150 |
153-180 |
| 20mm |
70-80 |
105-120 |
126-144 |
| 30mm |
30-40 |
45-60 |
54-72 |
| Copper plate cutting |
3 mm |
1350-1500 |
2025-2250 |
2430-2700 |
| 5 mm |
700-850 |
1050-1275 |
1260-1530 |
| 20mm |
160-200 |
240-300 |
288-360 |
| 30mm |
100-120 |
150-180 |
180-216 |
| Titanium alloy cutting |
13mm |
100-115 |
150-173 |
180-207 |
Other supplier products
|
|
water jet cutting glass plate |
EAAK water jet cutter application: Cutting materials are not limited (stainless steel, steel, copper, aluminum and other metals, glass steel, stone... |
|
|
EAAK water jet cutting machine for cutting stone glass metal |
Specification of EAAK CNC water jet cutting machine:(as follows)
Model
EK2030N
X Y axis Working size
2000mm*3000mm
Z working height
150mm
... |
|
|
Fiber laser metal cutting machine |
Application offiber laser cutting machine:
It can cut all kinds of metal plates, pipes, and is mainly used for rapid cutting of stainless steel, ca... |
|
|
CNC waterjet machine for glass cutting middle east |
Specification of EAAK CNCwater jet cuttingmachine:(as follows)
Model
EK3020
X Y axis Working size
3000mm*2000mm
Z working height
150mm
Cut... |
|
|
water jet cutting machine for cutting metal glass stone |
Waterjet cutter application:Cutting materials are not limited (stainless steel,carbon steel,copper,brass,aluminum and other metals,glass steel,ston... |
供应产品
Same products
