Overmolding & 2k Molding
The same type of material of different colors is usually used for two-color injection molding（or 2k molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance difference of the two materials actually used may be very big, if the elastomer is injected into the surface of a rigid material, the most difficult thing to solve during 2k moulding process is the delamination and shedding of the bonding surface of the two materials.
OVER-MOULDED 2K MOLDSFOR SALE
Water Proof Plastic Enclosure Mold
The product will be made by two times, which will inject the second piece after finishing the first piece in the other mold and different injection machine, normally will be no specific request for 2 different pieces injection time, injection machine.
Drip Tip Mold
The two-color molding will be made in one same injection machine at the same time by 2 times injection, with 2 injection barrels and 2 different injection gates by 2 different molds, but the product will be picked up one time, it will request 2 molds in one specific 2k injection machine to finish final injection.
2K Mold
This mold will be put with a movable core on gate position of the core side, the movable core is pushed to the rising position when injecting the first-color material, and the first color part is solidified, After that, the movable core return back through the action of the hydraulic device, at this time, another barrel injects the second color material into the space left by the retreat of the core, the mold is opened and the part is taken out after finishing one injection after it's solid.
Material Selection For 2K Plastic Injection Moulding
In addition to meeting the requirements of product function and appearance in the material selection of two-color products, whether the adhesion between raw materials can be solved well will be related to the success of two-color products in 2k moulding process is also the difficulty of 2k insert moldingtechnology.
The following four points should also be considered in the selection of materials for two-color injection molded products:
2K Molding Design Guide
Structural design is the most important part of 2k molding product design, the structure design of the product should not only consider the function of the product but also consider whether it meets the processing conditions and the complexity of the processing mold, in the design of two-color injection products, in addition to the issues to be considered for ordinary injection products, the following aspects should also be considered:
- Product structure shape design: in order to increase the 2k moulding product's fusion strength, the measure in the product structure design is to increase the contact area of the two parts. For example, if possible, the contact area of the two parts can be enlarged through the non-joining surface, and concave and convex grooves can be designed around the small cavity products (which can be generated by forced demolding, and the depth can reach 2mm).
As professional 2k molding manufacturers, we can offer kinds of related products for sale, anything you need, please contact us.
There are many custom plastic products manufacturersin China, but we are one of the best choices for you.
在线联系供应商
Other supplier products
 |
Plastic Pipe Mold | Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the mold at different times, the controller is divi... |
 |
Multi Cavity Mold | Multi Cavity Mold The runner filling balance must be considered when designing the multi-cavity mold in order to ensure the best effect of filling... |
 |
Medical Plastic Injection Mold | For medical plastic components manufacturer, it means that medical supervisors are required to supervise and manage the materials used to manufactu... |
 |
Plastic Pipe Mold | Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the mold at different times, the controller is divide... |
 |
2K Mold | 2KMolds The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the ... |
Same products
 |
Iopamidol Injection | 卖方: 北京北陆药业股份有限公司 | Iopamidol Injectionis the second-generation non-ionic iodinated Contrast Media launched in the gl... |
 |
Iodixanol Injection | 卖方: 北京北陆药业股份有限公司 | IodixanolInjection is a CT/X-ray Contrast Media that is isotonic with plasma. It has excellent ca... |
 |
Silicone Rubber Mold | 卖方: Packson Mold Co.,Ltd | Silicone rubber is a kind of elastic material, which is widely used in industry and family. It ha... |
 |
Silicone Rubber Injection Molding | 卖方: Packson Mold Co.,Ltd | Packson's state-of-the-art facilities consist of a 1000㎡ certified clean room, which is equipped ... |
 |
Prototype Injection Mould | 卖方: Packson Mold Co.,Ltd | Packsonmold is a company that provides high-quality prototype services, including 3D printing, CN... |
