低压PU发泡机
FoamapplicationFlexiblefoam
rawmaterialviscosity（22℃） ～3000CPS
多异氰酸酯～1000MPas
InjectionOutput 3.1-12.5g/s
Mixingratiorange 100：28～48
Mixinghead2800-5000rpm,forceddynamicmixing
TankVolume 30L
MeteringpumpApump:JR3.6TypeBPump:JR2.4Type
Compressedairrequirement dry,oilfreeP：0.6-0.8MPaQ：600NL/min（Customer-owned）
Nitrogenrequirement P：0.05MPa
Q：600NL/min（Customer-owned）
Temperaturecontrolsystemheat：2×3.2Kw
Inputpower three-phrasefive-wire，380V50HZ
Ratedpower about8KW
swingarm 90°Rotatableswingarm,0.7m(lengthcustomizable)
Volume 1000(L)*1750(W)*1800(H)mm,swingarmincluded
Color(customizable)Cream-colored/orange/deepseablue
Weight About600Kg
1. The metering pump has the advantages of high temperature resistance, low speed, high precision, and accurate ratio. And the measurement accuracy error is not greater than ±0.5%.
2. The variable frequency motor uses variable frequency to adjust the raw material flow and pressure. It has the advantages of high precision, simple and fast proportion adjustment.
3. The low-pressure machine can be equipped with options such as automatic water replenishment, high viscosity packaging pump, material shortage alarm, automatic cycle shutdown, and mixing head water cleaning.
4. Adopt bevel-tooth mixing head. The mixing head is simple and practical, mixes evenly and does not produce bubbles.
5. Adopt advanced PLC control system, automatic cleaning and air flushing, stable performance, strong operability, automatic identification, diagnosis and alarm when abnormal, abnormal factor display, etc.
在线联系供应商
Other supplier products
 |
高效、环保、节能的聚氨酯发泡注射机。 | InjectionPressure 0.01-0.1MpaInjectionflowrate 6-50g/s1-3Kg/minMixingratiorange 100:10～20（adjustable）Injectiontime 0.5～99.99S(correctto0.01S)Temper... |
 |
JYYJ-3D喷涂发泡机 | -Voltage：220V 50HZ -Heating Power：7KW -OUTPUT：2-10kg/Min -MAX OUTPUT (Mpa)：25Mpa -Matrial A:B=1:1 -spray gun: (set)：1 -Feeding pump ：2 -Barr... |
 |
2 部分树脂粘合和密封、灌封、垫片、就地成型垫片 (FIPG) 热间隙填充机 | FeaturesIndependent development 5-Axis Linkage PCB boards, help produce various shapes product such as round, square, oval, prismatic, trapezoid et... |
 |
聚氨酯涂胶机 点胶机 | 1. Fully automatic laminating machine. The two-component AB glue is automatically mixed, stirred, proportioned, heated, quantified, and cleaned in ... |
 |
五亚甲基高压PU发泡机/高压环戊烷聚氨酯机 | Features:1. The metering is accurate, and the high-precision metering device is adopted, and the metering accuracy is high. The meteringpump adopts... |
Same products
 |
JYYJ-H-V6聚氨酯泡沫喷涂机 | 卖方: 824810 | -Voltage：380V 50HZ -Heating Power：22KW-26KW -OUTPUT：2-10kg/Min -MAX OUTPUT (Mpa）：36Mpa -Matri... |
 |
JYYJ-Q200D聚氨酯泡沫喷涂机 | 卖方: 824810 | -Voltage：380V 50HZ -Heating Power：11KW -OUTPUT：2-10kg/Min -MAX OUTPUT (Mpa）：25Mpa -Matrial A:... |
|
|
五亚甲基高压PU发泡机/高压环戊烷聚氨酯机 | 卖方: 824810 | Features:1. The metering is accurate, and the high-precision metering device is adopted, and the ... |
 |
高压聚氨酯泡沫注射机 | 卖方: 824810 | Product Features of High Pressure PU Machine:1. Material injection mixing head can freely move fo... |
|
|
2 部分树脂粘合和密封、灌封、垫片、就地成型垫片 (FIPG) 热间隙填充机 | 卖方: 824810 | FeaturesIndependent development 5-Axis Linkage PCB boards, help produce various shapes product su... |
