.

Portable Surface Roughness Tester SRT6210

Model:SRT-6210 1.FEATURES This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD. * Multiple parameter measurement: Ra, Rz, Rq, Rt * Highly sophisticated inductance sensor * Four wave filtering methods : RC, PC-RC, GAUSS and D-P * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface. *Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation. *The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC. *Metric /Imperial Conversion 2.SPECIFICATIONS Display: 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz, Rq, Rt Measuring Range Ra, Rq: 0.005-16.00um/0.020-629.9uinch Rz,Rt: 0.020-160.0um/0.780-6299uinch Accuracy: ≤±10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 5um Material of Probe Pin: Diamond Dynamo-measurement of Probe: 4mN(0.4gf) Probe Angle: 90° Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 5l Driving speed: sampling length = 0.25mm Vt=0.135mm/s sampling length = 0.8mm Vt=0.5mm/s sampling length = 2.5mm Vt=1mm/s returning Vt=1mm/s Profile digital filter Filtered Profile: RC Filtered Profile: PC-RC Filtered Profile: Gauss Non-Filtered Profile: D-P Resolution : .001μm if reading <10μm 0.01μm if 10μm≤reading<100μm 0.1μm if reading ≥100μm Evaluation length : 5 cut-off Power Li-ion battery: rechargeable Operating conditions: Temp. 0~50℃ Humidity <80% Size:140x57x48 mm (5.5x2.2x1.9 inch) Weight: about 420 g


在线联系供应商

至: Tsingtao Toky Instruments Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Coating Thickness Gauge Meter CM8828
Coating Thickness Gauge Meter CM8828 Application:used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.in industries of petrol...
Halogen Moisture Meter MS110
Halogen Moisture Meter MS110 HalogenMoisture Goniophotometer is a new type of high-speed infrared moisture test instrument and can be used to measure the moisture of any materi...
Pin type and inductive moisture meter MS360  2 in 1
Pin type and inductive moisture meter MS360 2 in 1 Handhold Moisture meter MS360(2 in 1) is used for measuring moisture content of wood ,Timber,paper,Bamboo,Carton ,concrete, textile and other mater...
Wood moisture meter MS7100
Wood moisture meter MS7100 Wood/Timer moisture meter MS7100 is used for measuring moisture content of wood ,Timber,paper,Bamboo,Carton and other materials.It applicable of wo...
Leeb Hardness Tester HM-6561
Leeb Hardness Tester HM-6561 1.1 Typical Applications * Die cavity of molds * Inspection of bearing and other mass produced parts on a production line * Failure analysis of pre...
供应产品

Same products

FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter 卖方: Phonefix FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
WF-EDU-02 Motor & Propeller Test Kit
WF-EDU-02 Motor & Propeller Test Kit 卖方: Wing Flying Technologies Co., Ltd WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
WF-EDU-01 Motor and Propeller Test Kit
WF-EDU-01 Motor and Propeller Test Kit 卖方: Wing Flying Technologies Co., Ltd WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
WF-EN-50 Engine Test Bench
WF-EN-50 Engine Test Bench 卖方: Wing Flying Technologies Co., Ltd Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
WF-EN-15 Engine Test Bench
WF-EN-15 Engine Test Bench 卖方: Wing Flying Technologies Co., Ltd WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...