.

DJGW-2A Scanning Rebar Locator

The DJGW-2A apparatus is mainly used for testing concrete structure’s quality; locating the steel bar’s position and Measuring the rebar’s protecting thickness and diameter. It also can locate metal material’s position involved in the nonmetal material, such as the cable, the plumbing pipe in the wall and the metal involved in pipelines and woodiness. According Standard: Code for acceptance of constructional quality of concrete structures GB 50204-2002 Work Principle: Electromagnetic pulse method: Ultra-force anti-interference. Specification: Display Magnetic induction with Digital and Imitation mode (Our Patent), and adopt Multi-parameter sensor to avoid interference of adjacent bar when bar is intensive. Coating thickness and Rebar signal video display at real time; lock the min data and store, easily for operation. High and Low-two range work mode to confirm the accuracy and depth. Adopt no-side Grid and Section Scanning; Auto test and record Distance among rebar; and display rebar’s location in concrete at real time. Can test High Accuracy and Intensive rebar, which break traditional rule: Rebar Distance compare with Coating thickness ≥2:1 With high Black light, even can work at underground and cave. Bigger Data processing and Retest workshop’s data function to guide users. Special data analysis software, to PC to generate test report automatically. Main Function:Locating the steel bar’s position and Measuring the rebar’s protecting thickness and diameter.



在线联系供应商

至: 北京思科仪科技有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

SK225-S digital voice test hammer
SK225-S digital voice test hammer Brief introduction: NJ225-S test hammer submit to standard of GB/T9138-1988 and JJG817-93 and JGJ/T23-2001. Automatically calculate data and on sit...
SK225-V digital voice test hammer
SK225-V digital voice test hammer Brief introduction: Test hammer SK225-V submitted to GB /T9138-1988, JJG817-93 and JGJ/T23-2001 standards. The instrument is useful for quality In...
SK-75 brick test hammer
SK-75 brick test hammer Brief introduction: Submit to standard of GB/T50315-2000, the instrument is applied to test light material such as brick, light bone concrete etc. ...
SKAL-H 混凝土碱含量测定仪
SKAL-H 混凝土碱含量测定仪 检测方法:ISE法 测试指标:混凝土及原材料的碱含量,即等当量氧化钠含量Na2O(%) 产品用途: 混凝土原料中含有碱(钾、钠离子),当混凝土处在足够湿度的环境中一段时间后,混凝土中的碱(钾、钠离子)会与粗细骨料中的活性硅发生反应,造成结构膨胀和开裂,即发生碱骨料反应。由于碱骨料反应会对混凝土...
SKCK-2 Crack Width Measurement Instrument
SKCK-2 Crack Width Measurement Instrument Description: SKCK-2 crack width measurement instrument a new professional concrete structure measurement instrument for the crack width and the mic...
供应产品

Same products

FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter 卖方: Phonefix FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
WF-EDU-02 Motor & Propeller Test Kit
WF-EDU-02 Motor & Propeller Test Kit 卖方: Wing Flying Technologies Co., Ltd WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
WF-EDU-01 Motor and Propeller Test Kit
WF-EDU-01 Motor and Propeller Test Kit 卖方: Wing Flying Technologies Co., Ltd WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
WF-EN-50 Engine Test Bench
WF-EN-50 Engine Test Bench 卖方: Wing Flying Technologies Co., Ltd Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
WF-EN-15 Engine Test Bench
WF-EN-15 Engine Test Bench 卖方: Wing Flying Technologies Co., Ltd WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...