.

SKTJ-10 carbon fiber adhesive strength tester

Executive standard
CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate

Product introduction:
This instrument is recommended product of CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate, suitable for testing the adhesive strength between carbon fiber reinforced polymer laminate and concrete in the civil construction structure. According to the adhesive strength and the destroy form, it can instantly obtain the test results.

Features:
 New structure, outstanding advantage, convenient operation, with adhesive standard block conversion curves, the intensity (MPa) and force value (KN) is convertible
 Digital meter features: liquid crystal display, direct force reading, peak holding, data storage, curve correction, automatic shutdown

Configuration:
1. Host
2. Digital pressure meter
3. Testing accessories
4. Drawing test blocks (9pcs standard configuration)

Technical parameters:
 Main technical parameters
 Maximum tension: 10kN range: 10mm
 Nominal oil pressure: 25MPa
 Displacement and speed ratio: 0.14mm/n
 Resolution: 0.01MPa
 Measurement accuracy: 1.5%
 Standard test block specification: Φ 40mm
 Host weight: 2.3 kg


在线联系供应商

至: 北京思科仪科技有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

SKC61 Nonmetal Ultrasonic detector
SKC61 Nonmetal Ultrasonic detector Purpose  Testing building foundation piles by crosshole ultrasonic wave method .  Inspecting concrete defects by ultrasonic method, such as uncom...
SK-RCM混凝土氯离子扩散系数测定仪
SK-RCM混凝土氯离子扩散系数测定仪 检测方法:电迁移法(RCM) 执行标准:Executive Standard 北欧NT BUILD 492(Chloride Migration Coefficient from Non – Steady - State Migration Experiments) 国家标准《普...
SK-4000混凝土电阻率仪
SK-4000混凝土电阻率仪 检测方法:利用Wenner阵列传感器(50mm的间距)测试混凝土电阻率 测试指标:混凝土电阻率 产品用途 混凝土电阻率测定仪也叫电位检测仪(锈蚀分析仪),混凝土中钢筋的腐蚀是一个电化学过程,它产生电流使金属离解,电阻率越低,腐蚀电流流过混凝土就越容易,腐蚀的可能性就越大,因此测量混凝土的电阻率...
DJGW-2A Scanning Rebar Locator
DJGW-2A Scanning Rebar Locator The DJGW-2A apparatus is mainly used for testing concrete structure’s quality; locating the steel bar’s position and Measuring the reba...
SKTJ-10 carbon fiber adhesive strength tester
SKTJ-10 carbon fiber adhesive strength tester Executive standard CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate Produ...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...