Lumen Flux Measurement For SSL Products
Lumen Flux Measurement for SSL Products LPCE-2(LMS-8000) is a Lumen Flux Measurement for SSL Products. LED's quality should be tested by checking its photometric,Website:, colorimetric and electrical parameters. According to CIE 127-1997 and IES LM 79-08 standards, it recommends using an array spectroradiometer with integrating sphere and photometer head to test SSL products. LISUN GROUP developed LPCE-2 test system for LED products.The LMS-8000S CCD Spectroradiometer can connect with two integrating spheres: the big sphere is for LED luminaries and the small sphere is for LEDs & LED modules. The software can be chosen between the two integrating spheres to test. This new technology advanced can save a lot of time and longer use life the optical fiber & photo detector, the more introduce please visit at: Technology advanced for LMS-8000 CCD SpectroradiometerSystem Configuration: CCD Spectroradiometer (LMS-8000 or LMS-8000S), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2008R), AC Power Source (LSP-500VA), Integrating Sphere (IS-1.5M55P and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W)Measures:
• Colorimetric: Total Radiant Intensity, Dominant Wavelength, Peak Wavelength, Color Coordinates, Half-Bandwidth, Spectral Purity, Correlated Color Temperature (CCT), Color Rendering Index (CRI).
• Photometric: Total Luminous Flux, Luminous Efficiency, Radiant
• Electrical: Forward Voltage, Reverse Voltage, Forward Current, Reverse Current, Voltage, Current, Power, Power FactorSpecification:
• Wavelength Range: 380nm ~ 800nm (Optional: 200nm~1050nm UV-VIS-NIR)
• Spectral Wavelength Accuracy: ±1.5nm
• Accuracy of Chromaticity Coordinate (Δx, Δy): ±0.0015 (based on standard illuminate A)
• Correlated Color Temperature CCT: 1000K~100000K, CCT Accuracy: ±3%
• Color Rendering Index Range: 0~100.0, Accuracy: ±(0.3%rd±0.3)
• Photometry linearity: ±0.3%, Photometer detector: Class A
• Range of Luminous Flux: 0.01lm~199,900lm (Equipped with right size of integrating sphere via SMA905)
• Range of Luminous Intensity: 1mcd~999.9cd (Optional Function: it request to equipped with luminous intensity device)
• Complete measurement results in less than 1 second.
• With a build-in DC Power Supply for standard light source or LED: digital control, 0.01mA~3000.0mA (±0.5%) and 0.01V~30.0V (±0.5%)
• Connect with PC via USB, English version software can be run under WinXP and Win7
Other supplier products
|
|
|
EN55015 EN55022 9kHz~300MHz EMI Receiver System KH3962 is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Inte... |
|
|
|
AC/DC Withstand Voltage Test With Voltage 0~5KV(AC/DC) AC/DC Withstand Voltage Test
• Output voltage: 0-5kV(AC/DC);
• Cutoff current range: AC... |
|
|
|
IEC 61000-4-5 Lightning Surge Generator with 1.2/50μs 0~12KV Voltage Automatic lightning surge generator (or Lightning surge immunity) SG61000-5 is... |
|
|
|
IEC 60529,Website:, IEC 60598, IEC 60335 and IEC 60034-5 Water Ingress Testing Equipment for IPX1 to IPX8 JL-X Water Ingress Testing Equipment is a... |
|
|
|
CIE Standard Integrating Sphere Spectrophotometer Test System This CIE Standard Integrating Sphere Spectrophotometer Test System is suitable for ph... |
供应产品
Same products
