ISO 3537 Building Glass Ball Drop Test Equipment
ISO 3537 Building Glass Ball Drop Test Equipment
Glazing Materials Ball Test Device
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Suitable for impact test of safety glass and tempered glass.
Related Standard:
1) ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests– Clause 6: 227 g ball test, Clause 7: 2260 g ball test
2) GB 15763.3 Safety glazing materials in building Part 3: Laminated glass--Appendix B Drop ball impact specimen support
3) ASTM F3007 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
4) EN 356 Glass in building-Security glazing-Testing and classification of resistance against manual attack – Clause 6.1 Hard body drop test
5) UL1703 Flat-Plate Photovoltaic Modules and Panels – Clause 30 Impact Test
6) ANSI/SAE Z26.1 American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard
- Clause 5.5 Impact, Test 5 (Ball Drop 3.05m [10 ft])
- Clause 5.8 Impact, Test 8 (Ball Drop, Variable) (Multiple Glazed Unit, Class 2 Only)
- Clause 5.9 Impact, Test 9 (Variable Temperature Ball Drop)
- Clause 5.20 Penetration Resistance, Test 20
- Clause 5.23 Impact, Test 23 (Ball Drop, 6.10 m [20 ft])
Principle:
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
1) Top pulley group 2) Column 3) Square tube 4) Lower limit switch 5) Encoder bracket 6) Motor 7) Wire take-up 8) Base 9) Release device 10) Electromagnet 11) Expansion bolt 12) Leveling screw
Steel Ball：2260g / 82mm 1040g / 63mm 535g / 51mm 508g / 50mm 227g / 38mm
Drop Height: 1000mm, 5000mm, 12000mm, Customized
Automatic release and lift. Power: 220V 50Hz 580W
Supporting fixture:
a) Support Size: 350mm*350mm and 660mm*660mm (Customized)
b) Frame width 15mm
c) Steel box height 150mm
d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50
e) Interposed sheet of rubber: thickness 3mm, hardness shore A50
Applied Test Pieces Size: 300mm*300mm 610mm* 610mm
在线联系供应商
Other supplier products
 |
Shot Bag Impact Testing Machine | Related Standards: AS/NZS 2208 Safety glazing materials in buildings – Appendix D: Impact Test GB 15763.3 Safety glazing materials in build... |
 |
Fences Pipe Clamp | Function: Pipe clamp for protective fence of mechanical equipment Clamps and fixed feet for safety fences such as workshop isolation and equipment ... |
 |
整樘门 软重物体撞击试验 撞击体 30kg | 整樘门 软重物体撞击试验 撞击体 30kg 型号：YC-Z01-30 功能：整樘门 软重物体撞击试验用撞击体 参照标准： GB/T 14155-2008 整樘门 软重物体撞击试验 ISO 8270:1985 Doorsets -- Soft heavy body impact test 技... |
 |
Hard and Soft Pendulum Shock Device for Lifts | Hard and Soft Pendulum Shock Device for Lifts Related Standard: GB 7588-2003 Safety rules for the construction and installation of electric lifts ... |
 |
PV Module Impact Test Equipment | PV Module Impact Test Equipment Related Standards: IEC 61730 Impactor and Impact Test Frame 45 kg impactor and 1525 mm * 2480 mm impactor frame fo... |
