Friction Charging Tester
Friction charged charge tester
Friction Charging Testeris the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge.
Standards compliant:
JIS L-1094;
JIS T-8118;
ZB W 04008-89;
GB / T12703.2-2009;
GB 12014-2009;
GB / T23316-2009
Calculation formula:
Q = CV / A
Here, C: the charge amount of the capacitor (F) = 0.1 × 10-6 (F)
V: Voltage reading of potentiometer (V)
A: friction area of sample (m2) = 0.25 × 0.25 (m2)
Steps:
1, connecting the Faraday tube and the amount of charge measurement device: the end of a dedicated cable connected with the input of the charge meter connected to the other end of the Faraday tube with the outer cylinder of the socket connection.
2, turn on the charge amount of the tester power - the power switch up to the "1" position.
3, press the "clear" button, so that the charge meter shows the number is zero.
4, with a roller friction machine friction test, immediately after the end of the friction with the insulation rods into the Faraday tube tube inside the tube. In this process the specimen and other objects should be kept above 300mm.
5. Read the reading on the charge quantity measuring device.
Friction Charging TesterNote:
- 1, the system of Faraday tube outer cylinder should be reliably grounded.
- 2. Clear the charge amount measurement unit before each measurement.
- 3, the measured object must be measured from the power supply.
- 4, before the test, please turn on the power switch to make the machine warm up for 15 minutes.
- 5, voltage / current generator is not to sell goods.
- Fabric Friction Charging Charge Tester:
Voltage meter (R8240): 1 set
Capacitor: 1 set
Cable (A01009-200): 1 root
Connection cable (A01009-50): 1 root
Power supply-type strip in addition to the electrode: 1 root
Friction abutment / ground pad (nylon friction cloth): 1 set
Insulated rods (20Φ x 500L mm acrylic clear fiber): 1 root
Certificate of proof of voltage meter (traceability): 1 book
在线联系供应商
Other supplier products
 |
FPC Flex Durability Tester | Standard ASTM F392 Product features 1. the stepper motor drive, high-precision positioning, low noise, can be used for a long time 2. program-c... |
 |
Rapid screening Calorimeter | Product Introduction： The rapid - screening calorimeter is a professional calorimetric instrument for the quick assessment of reaction thermal haz... |
 |
Goggles Puncture Resistance Testing Machine | Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain weight of sharp objects fall from the height specified in ... |
 |
protective clothing Antisynthetic blood penetration tester | It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure. Standa... |
 |
Respirator Fit meter | PortaCount Respirator Fit Tester: Qinsun assesses the overall integrity of masks by performing an aerosol leak test utilizing the PortaCount Respi... |
Same products
 |
Lingfeng (LF) Air-Cooled Integrated Refrigeration Chillers | 卖方: Beijing Linggong Technology Co., Ltd. | TheLingfeng(LF)Air-Cooled IntegratedRefrigerationChillersis a professional refrigeration equipmen... |
 |
Low Temperature Chiller | 卖方: Beijing Linggong Technology Co., Ltd. | Low Temperature Chiller The conditioning deviceis specifically designed for thermal and fluid dy... |
 |
Low-Temperature Control System | 卖方: Beijing Linggong Technology Co., Ltd. | Low-Temperature Control System The conditioning deviceis specifically designed for thermal and f... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插... |
