Car seat belt fixed point test bench
Applicable standards:
National mandatory standards:
GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test methods"
GB 14167-2006/2013"Car Seat Belt installation Fixed Point"
GB 11550-2009"Automobile seat headrest strength requirements and test methods"
GB 13057-2003/2014"Strength of passenger seats and their vehicle fasteners"
GB 14166-2013"Seat belt, restraint system, Child restraint System for Motor Vehicle Occupants ISOFIX Child Restraint System"
International Standards and regulations:
Eu ECE R14Uniform Regulation on the approval of Vehicles with regard to seat belt fixing Points
Eu ECE R17Uniform Regulation on the approval of vehicles with regard to seats, seat fixation points and headrests
Eu ECE R80（specific terms may vary from version to version）
FMVSS 207Seating System
FMVSS 210Seat Belt Assembly Fixing Point
FMVSS 225Child Restraint System Fixed Point
Enterprise standard:
For example, the test requirements of the strength of the seat system and the strength of the seat belt fixing point in the EP development standard of the German Volkswagen company.
SAE J 384Stationary Point Test Code for Seat Belts in Motor Vehicles
SAE J 385, Motor Vehicle Seat Belt fixed point performance requirements, etc.
Main parameters:
The main parameters of the car seat belt fixed point test bench may vary from model to model and manufacturer, but usually include the following aspects:
Load measuring range:
It is generally 030kN （multi-channel, such as 6 channels） or 015kN （less channel, such as 3 channels）。 This range can cover the strength test requirements of most car seat belt anchorage points.
Control accuracy:
For the force measurement control system of 0——30kN, when the measurement and control load is 5kN——30kN, the control accuracy is the standard value of ±200N; When the measurement and control load is 0——5kN, the control accuracy is the standard value ±100N.
For the 0-15kN force measurement control system, the control accuracy is similar, but the value is reduced.
Hydraulic cylinder number and load:
The number of hydraulic cylinders may vary depending on the design of the test stand, for example, a nine-channel test stand may be equipped with nine hydraulic cylinders.
The load capacity of each hydraulic cylinder also needs to meet the test requirements, such as the load capacity of 3T.
Travel and loading speed:
The stroke of the hydraulic cylinder is usually longer, such as 1000mm, to accommodate different sizes of seats and seat belt fixing points.
The loading speed can reach the pre-set output in a specified time, such as 2 seconds or less.
Loading force holding time:
The load force holding time can be adjusted according to the test requirements, such as 0.2s to 120s stepless.
在线联系供应商
Other supplier products
 |
Glossiness Measuring Instrument | Standard The SpectroColor Pro S Series Gloss Meter adheres to stringent automotive interior quality control standards, includingISO 2813. ASTM D52... |
 |
Surgical Mask Flame Retardant Tester | Standards: GB 19083-2010 Technical Requirements for Medical Protective Masks, 5.5 Performances of Synthetic Blood Penetration and Barrier YY 0469... |
 |
Adiabatic Accelerated Calorimeter | Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempe... |
 |
Helmets Vertical SpacingInfrared - positioning Tester | Purpose This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets. Applicable Standard GB/T 2812-20... |
 |
Advanced Specific Surface Area and Micropore Analyzer | Test Principle Under low temperature conditions (e.g., liquid nitrogen bath, 77.3K), a certain amount of adsorbate gas (e.g., N₂) is introduced in... |
Same products
 |
Custom Stainless Components for OEM Applications | 卖方: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid... |
 |
Precision Design for Automatic Liquid Level Control | 卖方: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for liquid level control applications in valves, tan... |
 |
"China manufacturer power supply VM-5H3 for power generation | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer power supply VM-5H3 for power generation Is to use the generator sets of prof... |
 |
Reliable Components for Water and Industrial Systems | 卖方: Yongjia County Yaokang Technology Co., Ltd. | The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem... |
 |
Double Convex Lenses | 卖方: Shandong Yanggu Constant Crystal Optics, Inc | Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga... |
