Car seat belt fixed point test bench

Applicable standards:

National mandatory standards:

GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test methods"

GB 14167-2006/2013"Car Seat Belt installation Fixed Point"

GB 11550-2009"Automobile seat headrest strength requirements and test methods"

GB 13057-2003/2014"Strength of passenger seats and their vehicle fasteners"

GB 14166-2013"Seat belt, restraint system, Child restraint System for Motor Vehicle Occupants ISOFIX Child Restraint System"

International Standards and regulations:

Eu ECE R14Uniform Regulation on the approval of Vehicles with regard to seat belt fixing Points

Eu ECE R17Uniform Regulation on the approval of vehicles with regard to seats, seat fixation points and headrests

Eu ECE R80（specific terms may vary from version to version）

FMVSS 207Seating System

FMVSS 210Seat Belt Assembly Fixing Point

FMVSS 225Child Restraint System Fixed Point

Enterprise standard:

For example, the test requirements of the strength of the seat system and the strength of the seat belt fixing point in the EP development standard of the German Volkswagen company.

SAE J 384Stationary Point Test Code for Seat Belts in Motor Vehicles

SAE J 385, Motor Vehicle Seat Belt fixed point performance requirements, etc.

Main parameters:

The main parameters of the car seat belt fixed point test bench may vary from model to model and manufacturer, but usually include the following aspects:

Load measuring range:

It is generally 030kN （multi-channel, such as 6 channels） or 015kN （less channel, such as 3 channels）。 This range can cover the strength test requirements of most car seat belt anchorage points.

Control accuracy:

For the force measurement control system of 0——30kN, when the measurement and control load is 5kN——30kN, the control accuracy is the standard value of ±200N; When the measurement and control load is 0——5kN, the control accuracy is the standard value ±100N.

For the 0-15kN force measurement control system, the control accuracy is similar, but the value is reduced.

Hydraulic cylinder number and load:

The number of hydraulic cylinders may vary depending on the design of the test stand, for example, a nine-channel test stand may be equipped with nine hydraulic cylinders.

The load capacity of each hydraulic cylinder also needs to meet the test requirements, such as the load capacity of 3T.

Travel and loading speed:

The stroke of the hydraulic cylinder is usually longer, such as 1000mm, to accommodate different sizes of seats and seat belt fixing points.

The loading speed can reach the pre-set output in a specified time, such as 2 seconds or less.

Loading force holding time:

The load force holding time can be adjusted according to the test requirements, such as 0.2s to 120s stepless.

Other supplier products

	Geosynthetics Vertical Penetration Tester	Scope of application: Used to determine the vertical permeability of geotextile and its related products under constant water head method. The wat...
	Single wire and cable vertical combustion tester	Main use G233 Fabric vertical combustion tester is mainly used to evaluate the combustion characteristics of plastics and other non-metallic mater...
	Multiphase High - temperature and High - pressure Explosion Limit Tester	Reference Standards: EN 1839 ASTM E918 ASTM E2079 EN 15967 UL9540A Product Features: Technical parameters: Operating Environment (...
	Battery Electrode Resistance Tester	Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ...
	Face Mask Tensile Strength Testing Machine (for Face Mask Tensile Tester)	Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ...

All supplier products

Same products

	PHS‑25C Benchtop Digital pH Meter	Seller: Kelilong Electron Co.Ltd	Product Description: Equipped with BNC‑composite electrodes and power supplies adapt...
	PHS‑3C Automatic Calibration pH/Thermometer	Seller: Kelilong Electron Co.Ltd	Product Description: Equipped with BNC‑compatible combination electrodes and power s...
	KL‑016 Benchtop Digital pH Meter (Backlit Display)	Seller: Kelilong Electron Co.Ltd	Product Description: This instrument features a large‑screen digital display, extern...
	KL‑98 Professional Laboratory pH/ORP/Temperature Meter	Seller: Kelilong Electron Co.Ltd	Product Description: The PH‑98 Tester is an easy‑to‑operate, multi‑functional microp...
	KL‑03(I) Pen‑type High‑precision pH Meter	Seller: Kelilong Electron Co.Ltd	Product Description: This instrument is available in a variety of colors. Calibratio...