Geosynthetic creep tester
Scope of application:
DW1290 series geosynthetics creep test system is used to determine the tensile creep properties of geosynthetics products.
Meet the standard:
GB/T17637-1998,SO/FDIS 13431-1998,ASTM D 5262-2007,JTG E50 T1131-2006,QB/T 2854-2007,etc
Instrument features:
The instrument has the advantages of simple structure, beautiful appearance, stable performance, safety and reliability;
Microcomputer control, LCD display, touch screen operation, simple and convenient:
Electronic loading system, sample load is stable and accurate;
High-speed data acquisition and signal transmission system, real-time data acquisition and signal transmission, accurate and reliable;
High precision sensor, rapid response, good repeatability, stable and reliable performance;
Special fixture accessories, prevent sample slip and damage in the test process, sample loading is labor-saving, convenient and reliable;
Can be customized station, can measure multiple samples at the same time, high efficiency and energy saving;
High precision temperature control equipment, good uniformity;
Normal pressure loading system, using large diameter pressure cylinder to achieve convenient and reliable;
Movable normal loading system to eliminate machine system error:
The local displacement measuring device can realize real-time measurement of the change of the elongation between any two points on the sample under normal pressure.
Easy to install, easy to operate, long service life.
Technical parameters:
Number of stations 113 stations
Model Horizontal horizontal vertical
Loading mode Electronic Electronic mechanical
Measuring range 0——50kN 0—— 20kN
Resolution of force value is 0.01kN
Force value accuracy ±1%FS
Maximum tensile displacement 550mm 600mm
Displacement accuracy 0.03mm 0.02
Speed 0.3mm——50mm/min
Temperature control （optional） -30——70℃℃ can be customized
在线联系供应商
Other supplier products
 |
Electrolyte wettability test device | Standard ASTM D724-98: Standard Test Method for Surface Wettability of Paper (Angle-of-Repose Method Adapted) ISO 8296: Plastics – Determ... |
 |
Ultraviolet acceleration testing machine | TheUV aging test chamberis suitable for all kinds of geo-synthetics, such as light resistance, weather resistance and light ageingThe exposure test... |
 |
Flooring VOC Emission Testing Chamber | Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ... |
 |
Textile Point-to-Point Resistivity Tester | Product Performance It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "Sp... |
 |
Falling Sand Abrasion Tester | Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ASTMD968 ASTMD333 ASTMD1395 ASTMD2205 Main applicati... |
Same products
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插... |
 |
HCV1500高精度电压传感器 | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域，以及对灵敏度、稳定性、可靠性要... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
