Vacuum Ball - Disk Friction Tester
Standards
ASTMD4172-94
ASTMD2266-91
SH/T0189-92
Main Purposes
The vacuum ball - disk friction tester is a device specifically used for evaluating the sliding friction coefficient of point contact and the wear life of materials under vacuum and different atmospheric environment conditions. Its main purposes include:
Material Friction Performance Evaluation
- Simulate the actual friction conditions of materials in a vacuum or specific atmospheric environment, test the friction coefficient of materials, and evaluate their friction performance. - Test the friction behavior of materials under different loads and speeds to obtain friction performance data, providing a basis for material research, development, and optimization.
Wear Life Testing
- Calculate the wear life of materials by measuring the friction and wear conditions when the ball specimen rotates on the disk specimen. - Evaluate the performance changes of materials during long - term friction and wear processes, providing support for the assessment of material reliability and durability.
- Friction tests can be carried out in a vacuum environment to simulate the friction behavior in special application scenarios such as space and the nuclear industry.
- By adjusting the atmospheric environment, such as argon, nitrogen, etc., study the influence of different atmospheres on the friction performance of materials.
Lubricating Film Performance Evaluation
- For lubricating film materials, their wear life can be evaluated by testing the number of rotations before lubrication failure.
- Study the friction performance of lubricating films under different conditions to provide support for the research, development, and optimization of lubricants.
When the vacuum ball - disk friction tester conducts tests, it may need to comply with the following relevant standards or specifications (the specific standards may vary depending on the instrument model and application field):
Material Performance Testing Standards
Performance testing standards for specific material types, such as metallic materials, polymer materials, ceramic materials, etc.
Vacuum Environment Testing Standards
Such as standards and specifications regarding vacuum degree control and atmospheric environment simulation.
Technical parameters
Test standard: ASTM G99 G133 G59 G102 G119
Load: 0.25-200N
Speed: 0.1-3000rpm
Friction: 100N
Size: 650mm*400mm*700mm
Weight: 80KG
Power supply: 220V/50Hz
在线联系供应商
Other supplier products
 |
Surgical Mask Flame Retardant Tester | Standards: GB 19083-2010 Technical Requirements for Medical Protective Masks, 5.5 Performances of Synthetic Blood Penetration and Barrier YY 0469... |
 |
Rain Tester | Standard AATCC 35: Water Resistance: Rain Test for Fabrics BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration &... |
 |
multi-finger scratch/mar tester | Standards:GB/T 2918，GB/T 6151，GB/T 8424.3，PV3952，BMW GS97034-2，BMW GS97034-9，GMN 3943-2003，FLTM BN 108-13，STD1024-3113，GMW 14698-A，GMW 14688Product... |
 |
Flooring VOC Emission Testing Chamber | Standard ISO 16000-9 (Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116 (Standard Guide for Small-Scale Environmental Chamber De... |
 |
Anti-glare Panel Falling Weight Tester | Scope of application: The anti-glare board impact testing machine is designed and produced for each testing unit to measure the impact resistance ... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
