BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator
Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to the shape and size of the material hysteresis loop. When the low-frequency sinusoidal wave excitation voltage is magnetically induced, the induced electromotive force obtained is also a sinusoidal waveform, usually including a fundamental wave. By measuring the fundamental wave component of the inductive potential of the testing coil, the measured alloy composition and heat treatment status can be obtained, thereby achieving material hardness sorting.
SHAPEMERGEFORMAT pre-multi-frequency eddy current sorter is an advanced eddy current sorter. It can identify and sort the bearing ring, roller, steel ball material composition, hardness, heat treatment state and mixing.
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator Characteristics
The mechanism of the self-specific differential eddy current detection technology is to obtain the proportional balance of an eddy current signal by using different parts of the same sample as the reference objects, thereby avoiding the chemical composition, metallographic state and surface shape of different parts. The influence of the different electrical conductivity and magnetic permeability of the metal material under the action of the external alternating electromagnetic field.
- Suitable for large-scale inspection needs, to ensure product quality is foolproof. (It is possible to perform 100% inspection of the raw materials used and the finished bearings instead of the conventional sampling test)
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator Performance
|
Detection speed |
1 to 2 pieces/second (actual detection response time 200ms) |
|
Frequency Range |
100Hz～1MHz |
|
Gain |
0～99dB，step size 0.1dB |
|
Phase rotation |
0~360° step 1 ° |
|
Impedance range |
5 files adjustable |
|
Sampling Rate |
1～200000SPS adjustable |
|
Probe driving |
1%~100% adjustable |
|
Low pass |
1Hz～10000Hz |
|
high pass |
|
|
Multi-filter |
Have |
Features of BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator
|
Detection speed |
1 to 2 pieces/second (actual detection response time 200ms) |
|
Frequency Range |
100Hz～1MHz |
|
Gain |
0～99dB，step size 0.1dB |
|
Phase rotation |
0~360° step 1 ° |
|
Impedance range |
5 files adjustable |
|
Sampling Rate |
1～200000SPS adjustable |
|
Probe driving |
1%~100% adjustable |
|
Low pass |
1Hz～10000Hz |
|
high pass |
|
|
Multi-filter |
Have |
As one of the most professional eddy current testing companies, BKNprovidesndt testing machine, eddy current testing, ndt ultrasonic testing equipment, eddy current brake for sale, etc. Want to knowmore? Please contact us.
在线联系供应商
Other supplier products
 |
Bolt Eddy Current Sorter BKNFX-11 | Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external ... |
 |
Eddy Current Testing Equipment for Tube, Bar and Wire | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ... |
 |
Eddy Current Testing for Auto Parts | NDT Application in Automotive Industry: Eddy current hardness testingtechnology has been widely used in the detection of metal components in the... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. A... |
 |
Portable Magnetic Flux Leakage Testing Equipment | MFLequipmentrefers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects on the surface... |
Same products
 |
Wiring Harness Connector | 卖方: Aupins Technology Co., Ltd | Connector plugs are used as electromechanical components to connect electrical circuits. AP team ... |
 |
SAE J1772 Charging Connector | 卖方: Aupins Technology Co., Ltd | AP SAE J1772AC EV charging plug conforms to SAE J1772provisions and requirements. It is compatibl... |
 |
IEC 62196-2 Charging Connector | 卖方: Aupins Technology Co., Ltd | AP IEC AC charging plugs conform to IEC 62196-2 2-llb provisions and requirements. It is compatib... |
 |
Hyperboloid Contacts | 卖方: Aupins Technology Co., Ltd | The hyperboloid contactsspring terminal is the patented product specially developed and researche... |
 |
GB/T Charging Connector | 卖方: Aupins Technology Co., Ltd | GB/T Charging Connector is widely used in the AC charging system of electric vehicles and conform... |
