BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator
Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to the shape and size of the material hysteresis loop. When the low-frequency sinusoidal wave excitation voltage is magnetically induced, the induced electromotive force obtained is also a sinusoidal waveform, usually including a fundamental wave. By measuring the fundamental wave component of the inductive potential of the testing coil, the measured alloy composition and heat treatment status can be obtained, thereby achieving material hardness sorting.
SHAPEMERGEFORMAT pre-multi-frequency eddy current sorter is an advanced eddy current sorter. It can identify and sort the bearing ring, roller, steel ball material composition, hardness, heat treatment state and mixing.
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator Characteristics
The mechanism of the self-specific differential eddy current detection technology is to obtain the proportional balance of an eddy current signal by using different parts of the same sample as the reference objects, thereby avoiding the chemical composition, metallographic state and surface shape of different parts. The influence of the different electrical conductivity and magnetic permeability of the metal material under the action of the external alternating electromagnetic field.
- Suitable for large-scale inspection needs, to ensure product quality is foolproof. (It is possible to perform 100% inspection of the raw materials used and the finished bearings instead of the conventional sampling test)
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator Performance
|
Detection speed |
1 to 2 pieces/second (actual detection response time 200ms) |
|
Frequency Range |
100Hz～1MHz |
|
Gain |
0～99dB，step size 0.1dB |
|
Phase rotation |
0~360° step 1 ° |
|
Impedance range |
5 files adjustable |
|
Sampling Rate |
1～200000SPS adjustable |
|
Probe driving |
1%~100% adjustable |
|
Low pass |
1Hz～10000Hz |
|
high pass |
|
|
Multi-filter |
Have |
Features of BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator
|
Detection speed |
1 to 2 pieces/second (actual detection response time 200ms) |
|
Frequency Range |
100Hz～1MHz |
|
Gain |
0～99dB，step size 0.1dB |
|
Phase rotation |
0~360° step 1 ° |
|
Impedance range |
5 files adjustable |
|
Sampling Rate |
1～200000SPS adjustable |
|
Probe driving |
1%~100% adjustable |
|
Low pass |
1Hz～10000Hz |
|
high pass |
|
|
Multi-filter |
Have |
As one of the most professional eddy current testing companies, BKNprovidesndt testing machine, eddy current testing, ndt ultrasonic testing equipment, eddy current brake for sale, etc. Want to knowmore? Please contact us.
Send product request
Other supplier products
 |
MFL101 Tank Floor MFL Scanner | Technical Characteristics of MFL101 Tank Floor MFL Scanner The MFL tank floor scannerhas a unique full modular structure, from the main body of th... |
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage testing is a magnetic method... |
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Mag flux testingis a magnetic method of nondestruc... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossle... |
 |
Connecting rod hardness vortex sorting machine LGYDFX-01 | The connecting rod hardness eddy current testing machine has a calibration device, input compensation parameters, automatic/manual temperature comp... |
Same products
 |
Wiring Harness Connector | Seller: Aupins Technology Co., Ltd | Connector plugs are used as electromechanical components to connect electrical circuits. AP team ... |
 |
SAE J1772 Charging Connector | Seller: Aupins Technology Co., Ltd | AP SAE J1772AC EV charging plug conforms to SAE J1772provisions and requirements. It is compatibl... |
 |
IEC 62196-2 Charging Connector | Seller: Aupins Technology Co., Ltd | AP IEC AC charging plugs conform to IEC 62196-2 2-llb provisions and requirements. It is compatib... |
 |
Hyperboloid Contacts | Seller: Aupins Technology Co., Ltd | The hyperboloid contactsspring terminal is the patented product specially developed and researche... |
 |
GB/T Charging Connector | Seller: Aupins Technology Co., Ltd | GB/T Charging Connector is widely used in the AC charging system of electric vehicles and conform... |
