.

C Series Ultra Thin Signal SPD

In today's fast-paced world of information technology, electronic devices are being used in increasingly diverse applications. However, their lower operating voltage and reduced surge tolerance make them particularly sensitive to transient overvoltage in system signals. This is especially true in the field of automation, which involves a large amount of signal transmission, requiring the installation of numerous surge protective devices for transient overvoltage protection.

While ensuring the surge protection performance of SPDs is critical, their size is also becoming increasingly important. The more SPDs that can be installed in a single control cabinet, the fewer cabinets are needed, resulting in lower overall costs.

Signal SPDprotects signal devices (e.g. PLC, DCS, SCADA, transmitter, flow meter, solenoid valve) from lightning, which is applied to signals such as AI/ AO/ DI/ DO, RS485/ RS232/ RS422, RTD and TC etc..

Intrinsic Safety Signal SPD-3.5 mm Width

C Series Ultra Thin SignalSPDNetworkRelys on safety technical standards

Large discharge capacity, Nominal discharge current of In10kA. It has multiple authoritative certifications, including type tests and SIL3 certification.

Compact size, saves valuable space and is the thinnest SPD available at just 3.5mm

Customizable identification label for easy identification

Convenient installation, push-in or screw connection

Can be selected to protect RS-232, RS-485, RTD, TC, AI, AO, DI, DO, and other signal interfaces.

FAQ of C Series Ultra Thin Signal SPD

Q

What is the function of an SPD?

A

When lightning strikes, high-power equipment starts and stops, or electrostatic discharge occurs, transient overvoltage (surge) is generated, causing equipment damage. SPD (Surge Protective Device) is the abbreviation for surge protection device. SPD is installed at the front end of the equipment being protected. When a surge occurs, the SPD can quickly conduct electricity and discharge the surge to the ground, limiting the voltage to a safe level, thereby protecting the equipment at the back end.

Q

Should SPD be installed?

Established in 2002, CHENZHUhas developed as a manufacturing center that is able to manufacture 4 main categories of the product (Isolated Barrier, Signal Conditioner, Surge Protective Device, Safety Relay) with 18 ranges of series. In all, we have more than 500 plus models and more than 2000 specifications that can be configured to fit your needs.



在线联系供应商

至: Shanghai Chenzhu Instrument Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

CZ3000 Pulse Input Signal Conditioner
CZ3000 Pulse Input Signal Conditioner Pulse voltage input signal spdconditioners transfer the pulse voltage signal and provide isolated power supply for field instruments. The input ado...
Photovoltaic 1000 DC Power SPD
Photovoltaic 1000 DC Power SPD PhotovoltaicSPDfor DC power, 1000VDC; In(8/20us): 20kA/phase, Imax: 40kA/phase; hot-pluggable; fault indication; Features & Advantages of Ph...
Antennas And Feeders SPD
Antennas And Feeders SPD Antennas feeders SPD is used in the antenna feeder circuit of the radio communication station to suppress the induced lightning waves from the ante...
Antennas And Feeders SPD
Antennas And Feeders SPD Antennas And Feeders SPD Antennas feeders SPD, the coax lightning protectoror coax surge suppressor, is used in the antenna feeder circuit of the ...
Safety Mat Safety Relay
Safety Mat Safety Relay Safety mat relaymodules provide a high level of fail-safe operation for critical processes and protection. This safety mat and multi-function contr...
供应产品

Same products

Wiring Harness Connector
Wiring Harness Connector 卖方: Aupins Technology Co., Ltd Connector plugs are used as electromechanical components to connect electrical circuits. AP team ...
SAE J1772 Charging Connector
SAE J1772 Charging Connector 卖方: Aupins Technology Co., Ltd AP SAE J1772AC EV charging plug conforms to SAE J1772provisions and requirements. It is compatibl...
IEC 62196-2 Charging Connector
IEC 62196-2 Charging Connector 卖方: Aupins Technology Co., Ltd AP IEC AC charging plugs conform to IEC 62196-2 2-llb provisions and requirements. It is compatib...
Hyperboloid Contacts
Hyperboloid Contacts 卖方: Aupins Technology Co., Ltd The hyperboloid contactsspring terminal is the patented product specially developed and researche...
GB/T Charging Connector
GB/T Charging Connector 卖方: Aupins Technology Co., Ltd GB/T Charging Connector is widely used in the AC charging system of electric vehicles and conform...