C Series Ultra Thin Signal SPD
In today's fast-paced world of information technology, electronic devices are being used in increasingly diverse applications. However, their lower operating voltage and reduced surge tolerance make them particularly sensitive to transient overvoltage in system signals. This is especially true in the field of automation, which involves a large amount of signal transmission, requiring the installation of numerous surge protective devices for transient overvoltage protection.
While ensuring the surge protection performance of SPDs is critical, their size is also becoming increasingly important. The more SPDs that can be installed in a single control cabinet, the fewer cabinets are needed, resulting in lower overall costs.
Signal SPDprotects signal devices (e.g. PLC, DCS, SCADA, transmitter, flow meter, solenoid valve) from lightning, which is applied to signals such as AI/ AO/ DI/ DO, RS485/ RS232/ RS422, RTD and TC etc..
Intrinsic Safety Signal SPD-3.5 mm Width
C Series Ultra Thin SignalSPDNetworkRelys on safety technical standards
Large discharge capacity, Nominal discharge current of In10kA. It has multiple authoritative certifications, including type tests and SIL3 certification.
Compact size, saves valuable space and is the thinnest SPD available at just 3.5mm
Customizable identification label for easy identification
Convenient installation, push-in or screw connection
Can be selected to protect RS-232, RS-485, RTD, TC, AI, AO, DI, DO, and other signal interfaces.
FAQ of C Series Ultra Thin Signal SPD
Q
What is the function of an SPD?
A
When lightning strikes, high-power equipment starts and stops, or electrostatic discharge occurs, transient overvoltage (surge) is generated, causing equipment damage. SPD (Surge Protective Device) is the abbreviation for surge protection device. SPD is installed at the front end of the equipment being protected. When a surge occurs, the SPD can quickly conduct electricity and discharge the surge to the ground, limiting the voltage to a safe level, thereby protecting the equipment at the back end.
Q
Should SPD be installed?
Established in 2002, CHENZHUhas developed as a manufacturing center that is able to manufacture 4 main categories of the product (Isolated Barrier, Signal Conditioner, Surge Protective Device, Safety Relay) with 18 ranges of series. In all, we have more than 500 plus models and more than 2000 specifications that can be configured to fit your needs.
Send product request
Other supplier products
 |
CZWB Series Temperature Transmitter | CZWB Series Temperature Transmitter The CZWB series is an intelligent digital temperature transmitterdesigned specifically for industrial complexi... |
 |
Signal Conditioner | Universal signal conditioner is used in industrial process control systems. Isolated signal conditionerconnects industrial field instruments and co... |
 |
E-Stop Button, Safety Gate Safety Relay | CHENZHU e stop safety relayare suitable for the application of emergency Stop button and safety gate. Support 2 safety output contacts (N/O) and 2 ... |
 |
Intrinsic Isolated Barrier | Isolated barrier uses intrinsically safe explosion-proof and functional safety technologies and adopts various measures such as rapid cut-off, isol... |
|
|
Photovoltaic 1000 DC Power SPD | SPD for DC power, 1000v spd; In(8/20us): 20kA/phase, Imax: 40kA/phase; hot-pluggable; fault indication; Features & Advantages of Photovoltai... |
Same products
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Wiring Harness Connector | Seller: Aupins Technology Co., Ltd | Connector plugs are used as electromechanical components to connect electrical circuits. AP team ... |
 |
SAE J1772 Charging Connector | Seller: Aupins Technology Co., Ltd | AP SAE J1772AC EV charging plug conforms to SAE J1772provisions and requirements. It is compatibl... |
 |
IEC 62196-2 Charging Connector | Seller: Aupins Technology Co., Ltd | AP IEC AC charging plugs conform to IEC 62196-2 2-llb provisions and requirements. It is compatib... |
 |
Hyperboloid Contacts | Seller: Aupins Technology Co., Ltd | The hyperboloid contactsspring terminal is the patented product specially developed and researche... |
