Microscope Objective Lens
Microscope Objective Lens
Suitable for ITO, particle detection, wafer inspection
Infinity optical design for different microscope lensescan match infinity objective lens with a different mag
High-contrast & brightness image solution
Microscope objective designof new modular allows customizing different optical layouts on customers' requests
1x Microscope ObjectiveLensSpecification
Model |
Objective Magnification |
CCD Max Size |
Objective Aperature Diameter |
Image Path Spectrum |
Light Path Spectrum |
Laser Path Spectrum |
Lighting Path Mount |
Objective Lens Mount |
Microscopy LensXF-VM3-1X-C |
1X |
4-3 |
φ12mm |
Visible |
Visible |
/ |
/8mm point illumination |
M26×0.706 |
Microscopy Lens XF-VM3-1X-N |
1X |
4-3 |
φ12mm |
Visible |
/ |
/ |
/ |
M26×0.706 |
Microscopy Lens XF-VM3-05X-C |
2-3 |
φ12mm |
Visible |
Visible |
/ |
8mm point illumination |
M26×0.706 |
|
Microscope Lens XF-VM3-1X-DIC |
1X |
4-3 |
φ12mm |
Visible |
Visible |
/ |
/30W Blue LED |
M26×0.706 |
Microscope Lens XF-VM3-1X-CL |
1X |
4-3 |
φ12mm |
Visible |
Visible |
/ |
/8mm point illumination |
Support to objective turret with depth less tham 45mm |
Microscope Lens XF-VM3-05X-CL |
2-3 |
φ12mm |
Visible |
Visible |
/ |
/8mm point illumination |
Support to objective turret with depth less tham 45mm |
|
Microscopy Lens XF-VM3-D0510 |
Vertical 0.5X/Horizontal1X |
Vertical 2/3 |
φ12mm |
Visible |
/ |
/ |
8mm point illumination |
M26×0.706 |
Microscopy Lens XF-VM3-LA1X-C1-NIR |
1X |
φ12mm |
Visible |
Visible |
800-1200nm |
8mm point illumination |
M26×0.706 |
|
XF-VM3-LA1X-C2-NIR-CL |
1X |
φ12mm |
Visible |
Visible |
800-1200nm |
8mm point illumination |
Support to objective turret with depth less tham 45mm |
Different Microscope Objective Lens Types
In general, when it comes to the microscope lens types, we refer to the different magnification and uses of the four most commonly different microscope lenses on composite optical microscopes.
Scan the lens (4x)
The scanning objective is designed for getting bearings right before moving onto the low power lens.
Low-power lens (10 x)
The low-power microscope objective lens usually has 10x or 20x magnification. You can identify it by a yellow stripe around the lens housing. This objective can be very useful for viewing prepared specimens on slides.
High-power lens (40 x)
The high-power microscopy lens is applied for looking at smaller specimens like bacteria and cells that are invisible to the naked eye.
Oil-immersion lens (100 x)
These lenses are called ‘oil immersion lenses’ because you usually need to use them with oil in order to view your specimen.
Microscope Objective Working Distance
In general, the operating microscope objective working distance decreases with magnification and numerical aperture. Nowadays, the popular trend is to produce dry microscope objectives with as long working distances as possible, but this requirement is partly limited by a high numerical aperture that requires high resolution. This usually result in the manufacturers making a compromise between these two parameters.
To provide extensive optical solutions in machine vision optics systems, Canrill Optics, as a custom optical lens manufacturer, has been keeping developing, manufacturing and marketing machine vision telecentric lenssince 2009. In 2019 and 2020, Canrill Optics has successfully upgraded the telecentric lens to 4th generation PTL series and developed new series of non-telecentric Canrill lens.
在线联系供应商
Other supplier products
DMD Lithography Lens | DMD Lithography Lens We have been in close cooperation with LDI (Laser Direct Imaging) manufacturers, to research and produce LDI lens. Our... | |
Telecentric Illuminator | Better clarity and WBC, higher telecentricity Especially suitable for round workpiece measurement、 Specification Of Telecentric Illuminator M... | |
Telecentric Lens | Telecentric lens, is a kind of lens that the chief rays are parallel to the optical axis. There are three kinds of telecentric lens, that is object... | |
Machine Vision Telecentric Illuminator | Telecentric illuminatoris of great significance to the image processing system. Providing stable and reproducible illumination conditions, the tele... | |
Machine Vision Inspection | Machine Vision Inspection Inspection application is to detect defects, contaminants, functional flaws, and other irregularities in manufactured pr... |
Same products
8.0MP 10-40mm Zoom Lens 1/1.8" F1.4 Format Machine Vision Lenses | 卖方: 深圳市维客修科技有限公司 | Description Manual Zoom 8.0mp C Mount 10-40mm Lens Manual Aperture Machine Vision Lens 1/1... | |
Microscope Objective Lens | 卖方: Shenzhen Canrill Technologies Co., Ltd | Microscope Objective Lens Suitable for ITO, particle detection, wafer inspection Infinity opt... | |
DMD Lithography Lens | 卖方: Shenzhen Canrill Technologies Co., Ltd | DMD Lithography Lens We have been in close cooperation with LDI (Laser Direct Imaging) manufactu... | |
8k Line Scan (57.4mm) Telecentric Lens | 卖方: Shenzhen Canrill Technologies Co., Ltd | 8k Line Scan Lens Suitable for large format Area Scan Camera Line Scan Camera 16Kx3.5μm, 8Kx7... | |
16k Line Scan (82mm) Telecentric Lens | 卖方: Shenzhen Canrill Technologies Co., Ltd | 16k Line Scan (82mm) Telecentric Lens Specially designed for large image circle up to 82mm in le... |