Auto - ignition Point Tester for Liquids / ASTM E659
Standards
This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005) *Test Method for Auto - ignition Temperature of Liquid Chemicals* (English version).
Product Information
1. It adopts an embedded processor and the Windows CE operating system.
2. Equipped with an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.
3. It integrates high - temperature heat - insulation technology, temperature control, and precise detection technology.
4. It uses an electrically heated furnace, enabling fast heating.
5. The furnace chamber is made of heat - insulating vacuum ceramic fiber, providing excellent heat - insulation performance.
6. It uses a thermocouple sensor, which can quickly and accurately respond to temperature changes.
7. It is equipped with an automatic intelligent sample - injection module and a maintenance - free automatic cleaning function.
8. The test process is fully automated, requiring no manual intervention. There are animated image demonstrations of the experiment process, and reports can be generated automatically.
9. It is equipped with a temperature and humidity module, which can monitor the temperature, humidity, and atmospheric pressure of the test environment.
Technical Specifications
- Working environment: (5 ~ 40)°C, <85%RH
- Test object: Liquids
- Temperature control range: Room temperature ~ 650°C
- Temperature control accuracy: ±1°C below 350°C; ±2°C above 350°C
- Temperature measurement range: Room temperature ~ 800°C
- Temperature measurement resolution: 0.1°C
- Temperature measurement accuracy: ±2.5°C below 300°C; ±(0.75% of the reading) above 300°C
- Ambient atmospheric pressure measurement range: (60 ~ 110)kPa
- Ambient atmospheric pressure measurement accuracy: ±0.5kPa
在线联系供应商
Other supplier products
 |
Falling ball rebound instrument / Ball Rebound Tester | Product Introduction: The falling ball rebound instrument is designed and manufactured according to GB/T6670-2008 or ISO8307 or ASMD3574. It is su... |
 |
Multilayer geotextile single-layer thickness tester丨IS0 9863 | Meet the standard GB/T17598-1998. GB/T 13761.1-2022. JTG E50-2006. IS09863-90 Scope of application The multi-layer sample is mechanically separa... |
 |
Aluminum Tube Internal Coating Continuity Tester | The continuity tester for the inner coating of aluminum tubes is an important device specifically used to detect the continuity of the inner coatin... |
 |
Hot Tack Tester / Heat Seal Tester | Standards GB/T 34445 - 2017 ASTM F2029 Main Uses The hot - tack tensile tester is an instrument specifically designed to test the hot - tacking ... |
 |
Thermostatic water tank tester丨Thermostatic water tank machine | Scope of application: Thermostatic water tank is widely used in drying, concentrating, distillation, impregnating chemical reagents, impregnating ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
