Swimming goggles sealing tester
Applicable standards:
Seal test equipment for swimming goggles according to ISO 18527-3
Product Introduction:
The tightness of goggles according to ISO 18527-3 and other types of goggles is essential to guarantee their protection against liquids, gases and vapors. Our test equipment is designed according to the requirements of the new ISO 18527-3 standard and facilitates rapid testing during the production process.
Autoclave testing according to EN 14325.
The (air) permeability of fabrics and seams of protective clothing to chemicals after exposure to different stesses is the degree of product performance grade. Our test equipment is designed in accordance with EN 14325 autoclave test methods.
The instrument is used in laboratories and manufacturing facilities for:
Evaluating the watertightness and sealing performance of swimming goggles.
Assessing the effectiveness of the seal against liquids, gases, and vapors.
Quality control during the production process to ensure consistent sealing integrity.
Research and development of new goggle designs and sealing materials.
Ensuring goggles comply with performance and safety standards like ISO 18527-3.
Product Advantages:
Provides a controlled and objective test for evaluating goggle sealing performance.
Essential for guaranteeing protection against liquid, gas, and vapor ingress.
Designed according to the requirements of standards like ISO 18527-3.
Facilitates rapid testing, making it suitable for production line quality control.
Helps ensure consistent sealing integrity across manufactured goggles.
Product Features:
Based on the test type and application:
Standardized test head or fixture designed to replicate the contours of a face for securely mounting the goggles.
System for applying a controlled positive pressure or negative pressure (vacuum) within the sealed volume of the goggles once fitted to the test head.
Pressure or vacuum sensing system to monitor the applied pressure/vacuum level.
Leakage detection mechanism, typically involving monitoring for pressure/vacuum decay over time.
Timer to control the test duration as specified by the standard.
Control system for setting test parameters and indicating pass/fail status.
在线联系供应商
Other supplier products
 |
Geomembrane Environmental Stress Cracking Resistance Tester | Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin... |
 |
Shoe heat insulation testing machine -- sand bath | Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard for... |
 |
Safety Helmet Anti-static Tester / Testing Equipment | Product Introduction: Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB... |
 |
Catheter Burst Pressure Tester / Catheter Burst Pressure Testing Equipment | Compliance Standards YY/T 1536 - 2017 YY 0285.1 - 2017. etc. Main Uses The catheter burst pressure tester is a key device used to evaluate cathe... |
 |
Infusion Pump Flow Rate Tester GB 8368 | Compliance Standards GB 8368 - 2018 Disposable Infusion Sets, etc. Main Uses The infusion set flow rate tester is an instrument specifically des... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
