Spectrophotometer ISO 7724-1

Standard

CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards.

ASTM E1164. DIN 5033: Compliant with industrial color difference evaluation protocols.

GB/T 3978. GB 2893: Adheres to Chinese national standards for color accuracy.

Product Advantages

1. Dual-Mode Precision

CMOS Dual-Path Sensor: Simultaneous SCI/SCE measurement with 0.04 ΔE*ab repeatability.

10nm Optical Resolution: Covers 400–700nm spectrum for fluorescent material analysis.

2. Ergonomic Excellence

410g Ultra-Light Build: Compact design for one-handed operation during prolonged use.

2.8” Touchscreen: Intuitive navigation with real-time pass/fail indicators.

3. Industrial Durability

10-Year LED Lifespan: Withstands 1.2 million+ measurements.

IP54-Rated Housing: Dust/splash-proof for factory floor deployment.

4. Smart Calibration

Auto-Whiteboard Validation: Contact-based calibration with R%≥95% reference tile.

Self-Diagnostics: Error alerts for misalignment or low battery.

5. Connected Workflow

SQCX Software Integration: Generates ISO-compliant reports with SPC statistics.

Bluetooth Printing: Wireless label generation via optional micro-printer.

Accessories & Options

Standard Kit:

8mm aperture adapter.

SQCX color management software license.

NIST-traceable calibration certificate.

Optional Upgrades:

Micro Printer: On-site label generation.

Powder Test Kit: For loose pigment analysis.

UV Cure Module: For fluorescent material testing.

Consumables:

10 × Replacement calibration tiles.

1L Optical cleaning solution (isopropyl-based).

Warranty:

24-month manufacturer’s warranty (extendable to 60 months).

Lifetime technical support via global hotline.

Technical Parameters

Specification	Details
Illumination	D/8 geometry (diffuse/8°)
Sensors	CMOS dual-path array
Wavelength Range	400–700nm (10nm intervals)
Repeatability	ΔE*ab ≤0.04 (MAV/SCI)
Inter-Instrument Agreement	ΔE*ab ≤0.4 (BCRA II tiles)
Measurement Time	1 second
Battery Life	8 hours (8.000 measurements)
Dimensions	94mm × 68mm × 188mm
Weight	410g (without calibration base)
Operating Conditions	0–40°C, <85% RH (non-condensing

Other supplier products

	Shoelace Abrasion Tester / SATRA TM93	Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abra...
	Film punching machine ASTM	Meet the standard: GB/T1528; GB/T529; GB/T8083; GB/T 15340.ASTM Technical parameters: Travel range :100mm Blanking force: about 20kN Table siz...
	Film Heat Shrinkage Tester ASTM D2732	The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio...
	Dry Cleaning And Washing Cylinder AATCC	Testing Standards: AATCC 162. 16 CFR Part 1610 Applications: Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry...
	Fabric Wrinkle Bending Tester / AATCC 128 / Textile Tester	Overview The Fabric Wrinkle Bending Tester is a specialized instrument used to assess the wrinkle recovery properties of various textile fabrics. ...

供应产品

Same products

	Bottle Wall and Bottom Thickness Tester	卖方: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	卖方: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	卖方: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	卖方: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	卖方: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...