Thermal Radiation Performance Tester(RPP)
Introduction Thermal protective clothing and some fire-retardant properties of the material refers that human body carry out security protection who work under high temperature conditions, so as to avoid the human body's high temperature injury. In theory, there are three forms of heat damage to the human body: thermal convection; B. heat transfer; C. thermal radiation; In general, the practical application is more than the above two or three kinds of mixing effect. So the thermal protection should be used for different purposes and use of the environment to highlight its certain thermal protection performance. I. Thermal Radiation Protection Performance Test Method (RPP Test) Radiant Protective Performance; II. Thermal Radiation and Heat Convection Mixing Protective Performance Test Method (TPP Test) Thermal Protective Performance; The RPP test is mainly used to determine the radiant thermal protection performance of thermal protective clothing. Since thermal radiation is one of the main heat transfer forms that cause thermal damage. The method can better test and evaluate the thermal protection performance of thermal protective clothing from one aspect, and has been widely used in the field of forest fire. Features ◆ Evaluation of flame retardant properties of flame retardant materials ◆ Detect abnormalities and reduce accidents ◆ Calculate the RPP value ◆ Evaluate thermal protection performance ◆ Improve job safety ◆ Improve the quality control system Technical Parameters Items Parameters Heating power 6.5Kw/220V/50Hz Heating length 178mm, diameter 8mm Heat flux density 10Kw/m2-80Kw/m2 Radiation source temperature control －1200℃±5℃ Thermal radiation source temperature sensor Thermocouple (0 ℃ -1600 ℃) Calorimeter heat capacity 480.937J/K Heating area 50mm2×50mm2 Calorimeter temperature range －80℃ Test environment Between 15 ℃ -35 ℃ ,the room without air circulation
在线联系供应商
Other supplier products
 |
Safety Helmets Acceleration Impact & Penetration Tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorpti... |
 |
Coatings Shear Fatigue Tester | Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
 |
Wear Scar Profilometric Measuring Instrument | Applicable standards When the probe type material surface abrasion measuring instrument is tested, it usually needs to follow certain standards an... |
 |
Thermal Radiation Performance Tester(RPP) | IntroductionThermal protective clothing and some fire-retardant properties of the material refers that human body carry out security protection who... |
 |
Direcct flame impingement Tester | Introduction The testerisdesignedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accura... |
Same products
 |
Liquid Sliding Penetration Comprehensive Performance Tester | 卖方: 上海千实精密仪器 | G373 Liquid penetrating and strike-through comprehensive performance tester - Penetrability test ... |
 |
Nonwovens liquid loss tester | 卖方: 上海千实精密仪器 | Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric mate... |
 |
Elmendorf Tearing Strength Tester | 卖方: 上海千实精密仪器 | G008 Manual Tearing Tester - Material Tear Resistance Test G008Manual Tearing Tester, The Elmend... |
 |
Dry Cleaning & Washing Cylinder | 卖方: 上海千实精密仪器 | IntroductionThe dry cleaning and washing cylinder consists of a stainless steel rotary test chamb... |
 |
Rotary Rubbing Color Fastness Tester (Crockmeter) | 卖方: 上海千实精密仪器 | Standard AATCC 116: Colorfastness to Crocking (American Association of Textile Chemists and Co... |
