.

GD-255 Distillation Apparatus

供应商: 67165

供应产品
Summary
The instrument is designed and made as per the national standard of People’s Republic of ChinaGB/T255 Test Method for Distillation Characteristics of Petroleum Productsand the industrial standard of People’s Republic of ChinaSH/T0121 Technical Requirements for Petroleum Products Distillation Tester. It is suitable to determine distillate constituent of liquid fuels, solvent oils, and light petroleum products.
I. Main technical features
1. This instrument is a kind of all-in-one machine. The design is reasonable and easy to operate.
2. The rising up and lowering down of the heating furnace is easy and stable to adjust.
3. The water chamber adopts stainless steel material.Good corrosion resistance.
4. The heating power can be adjusted continuously by electronic voltage regulator.
II. Main technical specifications
1. Power supply: AC(220±10%)V,50Hz
2. Distillation flask: Made of hard glass. Heat resistance is higher than 500℃. Diameter of ball is φ69mm±1mm. Diameter of bottleneck is φ16mm±1mm. The angle between branch pipe and bottleneck is 75°±3°
3. Thermometer: (0~360)℃,division value 1℃
4. Condensate tank: Made of stainless steel material. The condenser pipe is made of brass and diameter is ф16mm×1mm.
5. Heat adjustment: It consists of heating device, thermal control circuit and control panel. Power 1000W,Heating rate can be adjusted continuously.
6. Measuring cylinder and weight: Two kinds of cylinder 10ml and 100ml. The weight is made of carbon steel and being placed on cylinder bottom to prevent the cylinder from floating.
7. Working environment: Room temperature-10~+35℃. Relative humidity ≤85%
8. Maximum power consumption: 1100W
9. Dimension: 710mm×240mm×470mm


在线联系供应商

至: 67165
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

GDJ-5S Rotational Viscometer
GDJ-5S Rotational Viscometer I. Summary  The instrument adopts advanced mechanical design technologies, manufacturing techniques, and microcomputer controlling techniques, so i...
GD-3536D FuGD-3536D Fully-automatic Cleveland Open Cup Flash Point Testerlly-automatic Cleveland Open Cup Flash Point Tester
GD-3536D FuGD-3536D Fully-automatic Cleveland Open Cup Flash Point Testerlly-automatic Cleveland Open Cup Flash Point Tester Summary: The instrument is designed and made as per national standard of ChinaGB/T 7600 Standard Test Method for Water Content of Transformer Oil i...
GD-265C Kinematic Viscometer
GD-265C Kinematic Viscometer Summary This instrument is designed and made as per the industrial standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petr...
GDGS Full-Automatic Tangent Delta Test Set for Transformer Substation
GDGS Full-Automatic Tangent Delta Test Set for Transformer Substation 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate...
ASTM D445 Petroleum Products Intelligent Kinematic Viscosity Bath
ASTM D445 Petroleum Products Intelligent Kinematic Viscosity Bath Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’...
供应产品

Same products

BS EN 12600 双轮胎冲击体
BS EN 12600 双轮胎冲击体 卖方: 秦皇岛源辰科技设备有限公司 参考标准: BS EN 12600:2002建筑用玻璃。摆锤试验。平板玻璃的冲击试验方法和分类 技术数据: 1)充气轮胎冲击器: 重量:50kg±0.1 kg 胎压:0.35Mp...
Pct高压高低温试验箱
Pct高压高低温试验箱 卖方: 广东艾思荔检测仪器有限公司 HAST PCT高低温耐压试验箱广泛应用于多层线路板、IC封装、液晶屏、LED、半导体、磁性材料、钕铁硼、稀土、磁铁等产品的密封性测试,可测试上述产品的耐压性和气密性。
工业用可编程加速老化测试仪
工业用可编程加速老化测试仪 卖方: 广东艾思荔检测仪器有限公司 HAST(高加速应力测试)是一种用于评估电子元件和其他材料在高温和高湿条件下的可靠性的测试。HAST测试箱是一种设备,它提供了受控的高温和湿度条件,以模拟老化和降解对材料的影响,比正常使用的时间...
CE认证实验室设备运输振动测试仪Un38.3标准
CE认证实验室设备运输振动测试仪Un38.3标准 卖方: 广东艾思荔检测仪器有限公司 CE认证实验室设备运输振动测试仪适用于玩具、电子产品、家具、礼品、陶瓷、设备等包装的耐振动测试。,在模拟运输条件下,根据美国和欧盟运输标准(ASTM,ISTA)
大型模拟运输振动测试仪
大型模拟运输振动测试仪 卖方: 广东艾思荔检测仪器有限公司 本机适用于各种包装材料、PC板、电器产品等的运输间损伤模拟试验。