.

din abrasion resistance tester for rubber

Din Abrasion Tester is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with the above principle. It consists of test specimen holder with a cylindrical opening adjustable between 15.5 to 16.3 mm to clamp the test specimen with an arrangement to adjust the length of test specimen protruding out.

Standard:
DIN 53516, JIS K6369 ,GB/T 20991,GB 20265-2006,GB20266-2006,SATRA TM174,BS 903,JIS K6264,GB/T9867,ISO4649

Main Principles:
What a load under a certain level in gauze, grinding a cylindrical cross-section sample determined stroke on the gauze surface, by measuring the amount of wear quality of the sample, and then by the density of the sample to calculate the volume of the amount of abrasion, in order to the test comparable, and finally be subject to the standard rubber, the test results are expressed as relative volumetric wear to verify the amount of gauze-based or full representation with respect to the amount of wear of a certain standard wear rubber base.

Main Feature:
With a small sample, save time, friction way of non-repetition, low noise, high efficiency, good reproducibility and easy to operate and so on.

Din rubber abrasion tester main parameters:
1. The test piece: φ16mm, 6 ~ 15mm (D)
2. Clamp load: 2.5N
3. Weight load: 2.5N, 5N
4. The fixture lateral displacement volume: 4.2mm / wheel every lap
5. Abrasive cloth: 60 #
6. Roller Diameter: 150mm
7. Roller Length: 460mm
8. The roller speed: 40rpm
9. predetermined stroke: 40m / 20m
10. Wear Speed: 0.32m / sec
11. Inclination: 3 ° test piece and the roller support shaft vertical angle
12. Volume: 70 × 30 × 30cm
13. Weight: 61kg
14. Power source: 1∮, AC220V, 3A



在线联系供应商

至: 千实精密机电仪器检测设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Fast thermal conductivity tester
Fast thermal conductivity tester Fast thermal conductivity tester-Mainly used for the determination of non-metallic solid material thermal conductivity, suitable for testing units...
building insulated material combustion tester
building insulated material combustion tester According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the ve...
Antisynthetic blood penetration tester For protective clothing testing
Antisynthetic blood penetration tester For protective clothing testing It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure. Standard...
button snap pull testing machine
button snap pull testing machine Snap Button Tester Testing Standards: ASTM D7142-2/F963, CFR 1500, EN 71 PART 1, GB 6675, ISO 8124, M&S P115A . Product Information: The Snap...
Digital Elmendorf Tearing Tester
Digital Elmendorf Tearing Tester
供应产品

Same products

PV Module Impact Test Equipment
PV Module Impact Test Equipment 卖方: 秦皇岛源辰科技设备有限公司 PV Module Impact Test Equipment Related Standards: IEC 61730 Impactor and Impact Test Frame 45 k...
Safety Glass Impact Test Device - Headform Impact Test Device
Safety Glass Impact Test Device - Headform Impact Test Device 卖方: 秦皇岛源辰科技设备有限公司 Safety Glass Impact Test Device - Headform Impact Test Device Related Standard: ISO 3537 Road veh...
BS EN 12600 Dual Tyre Glass Impact Test Equipment, Construction Glass Impact Test
BS EN 12600 Dual Tyre Glass Impact Test Equipment, Construction Glass Impact Test 卖方: 秦皇岛源辰科技设备有限公司 BS EN 12600 Dual Tyre Glass Impact Test Equipment, Construction Glass Impact Test Reference Stan...
Leather Bag Impactor 45kg/46kg
Leather Bag Impactor 45kg/46kg 卖方: 秦皇岛源辰科技设备有限公司 Leather Bag Impactor 45Kg/46 kg Function: Used as impactor for tempered glass and laminated glass...
ISO 3537 人头模型用毛毡帽
ISO 3537 人头模型用毛毡帽 卖方: 秦皇岛源辰科技设备有限公司 名称:毛毡帽 材质:羊毛毡 半径:95 mm 厚度:5 mm 功能:用于人头模型,以评定安全玻璃在受到钝物,大体积物体的冲击下的最小强度和内聚力。 参照标准:GB/T 5137.1 汽...