magic tape fatigue testing machine
VELCRO FATIGUE TESTER occupies an important place among test equipment. It is a test device with which tests are conducted by opening and closing a Velcro of given width a given number of times. This test device, can test the performance of Velcro bands in wet and dusty conditions. Textile manufacturers use this test equipment in a number fields.
Standards:
DIN-3415、SATRA TM123、ISO 22776、GB/T 3903.20、GB/T 3903.21、GB/T 23315-2009
Technical Parameters:
1. Wheel diameter: the previous round φ162.5mm, the next round φ160mm;
2. Wheel width: 70mm;
3. Rolling speed: 60rpm / min;
4. Fixture slot: width 4mm, length 55 ± 2mm;
5. Reverse time: 30s reverse;
6. Tests: 5000 times;
7. Load: 5kg;
8. Counter: Counter: LCD liquid crystal display, 0-999999;
9.HP: AC1 / 8HP dual-frequency motor;
10. Instrument material: stainless steel;
11. Surface treatment: painting;
12. Volume: 70 × 47 × 60cm;
13. Weight: 51kg;
14. Power: AC220V, 50HZ, 5A.
Standard configuration:
Velcro fatigue testing machine 1 Taiwan
5kg weight 1
Power cord 1
Features:
1. Determine, opening and closing strength;
2. Digital reading;
3. Construction, in compliance with the standards ;
4. Velco Strips Test weights are supplied with tester;
5. Can be used with every kind of Velcro strips;
6. Rotation – Meter provides the pre-determined number of tests;
Other supplier products
|
45 Degree Flammability Tester |
Testing Standards:ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644Applications:45 degree flammability tester is desi... |
|
Filter Media Tester APM 2005 |
Automatic test rig for permeable materials for measurement of particle penetration .With this test rig concept, the flow over the material under te... |
|
Crosshatch scratch tester |
IntroductionCrosshatch scratch tester/Scratch tester makes contacting relative motion between the scratching head and material surface for the eval... |
|
falling-pendulum fabric tearing strength elmendorf tester |
Standards:
ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974
Applications:
Digital Elmen... |
|
ASTM D5264 Ink Rub Tester (Rub & Abrasion Tester) |
The instrument is used for testing the scuff, marking and rub resistance of cartons, films and commercial printed material. Ink Rub Tester (Rub &a... |
供应产品
Same products