magic tape fatigue testing machine
VELCRO FATIGUE TESTER occupies an important place among test equipment. It is a test device with which tests are conducted by opening and closing a Velcro of given width a given number of times. This test device, can test the performance of Velcro bands in wet and dusty conditions. Textile manufacturers use this test equipment in a number fields.
Standards:
DIN-3415、SATRA TM123、ISO 22776、GB/T 3903.20、GB/T 3903.21、GB/T 23315-2009
Technical Parameters:
1. Wheel diameter: the previous round φ162.5mm, the next round φ160mm;
2. Wheel width: 70mm;
3. Rolling speed: 60rpm / min;
4. Fixture slot: width 4mm, length 55 ± 2mm;
5. Reverse time: 30s reverse;
6. Tests: 5000 times;
7. Load: 5kg;
8. Counter: Counter: LCD liquid crystal display, 0-999999;
9.HP: AC1 / 8HP dual-frequency motor;
10. Instrument material: stainless steel;
11. Surface treatment: painting;
12. Volume: 70 × 47 × 60cm;
13. Weight: 51kg;
14. Power: AC220V, 50HZ, 5A.
Standard configuration:
Velcro fatigue testing machine 1 Taiwan
5kg weight 1
Power cord 1
Features:
1. Determine, opening and closing strength;
2. Digital reading;
3. Construction, in compliance with the standards ;
4. Velco Strips Test weights are supplied with tester;
5. Can be used with every kind of Velcro strips;
6. Rotation – Meter provides the pre-determined number of tests;
Other supplier products
|
|
SAE J1756 vehicle windscreen fogging test equipment |
Fogging tester is used to determine the windscreen fogging according to ISO, DIN, ASTM and other automotive standards. The equipment has a compact ... |
|
|
Medical Face Masks filter material Particulate filtration efficiency tester |
Medical Face Masks filter material Particulate filtration efficiency tester is used for performance testing of filter elements, disposable masks, f... |
|
|
Intelligent fiber heat shrinkable tester |
Intelligent fiber heat shrinkable tester used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, b... |
|
|
Filter Media Tester HMT 1000 |
Heatable modular test system for oil mist separators in accordance with ISO 20654 Quality assurance and the development of filters/separators/traps... |
|
|
Zipper Testing Machine of Reciprocating Pull |
Zipper Testing Machine of Reciprocating Pull
Testing Standards:
QB/T 2171/2172/2173, BS 3084, AS 2332, NF G91-005, JIS S3015, DIN 3419-1, SATRA T... |
All supplier products
Same products
