Fully automatic membrane pore size analyzer ASTM316 GB/T32361-2015

Standards:

ASTM316. GB/T32361-2015

Applications:

Scope of use:

Suitable for samples of various materials such as polymers, ceramics, glass, metal, paper, cloth and composite materials.

Suitable for polymer membrane, filter paper, sintered metal, foamed metal, wire mesh, sintered felt, porous ceramics, non-woven fabric, fused sand glass and other types of membranes and filter materials.

Suitable for samples of various shapes such as tube type, multi-channel type, sheet type, hollow fiber, capsule type, and folded type.

For special samples, provide reliable testing process and various accessories required, and share our experience in testing various special samples with customers.

Fully automatic membrane pore size analyzer, including micro-filtration membrane pore size analyzer based on capillary flow method (bubble point method), ultra-filtration membrane pore size analyzer based on liquid-liquid replacement method, and multifunctional membrane performance tester, suitable for analysis Pore size distribution of various micro-filtration materials, the testing process is fully automatic and intelligent, and can accurately measure bubble point pressure, maximum pore size, average pore size, most probable pore size, gas flux, gas permeability, pore size distribution, etc

Equipment testing functions:

Bubble point pressure

Maximum diameter

Average diameter

Pore size distribution

Gas permeability

Technical parameter:

Model Name: GDA

Power supply: 220V,AC50Hz,120W

Communication method: RS485

Dimension: 480(L)×410(W)×240(H)mm

Working medium: cylinder nitrogen, compressed air

Testing pressure: 0-6bar

Testing flow: 0~50L/min

Aperture test range: 0.08~500μm

Working environment Ambient temperature: 5-40℃, Relative humidity: 10-80%

Sample size Diameter: 1-50mm

Special sample requirements: can be customized

Accessories: computer, vacuum infiltrator, professional wetting agent, test sample cell

GDA Micro-filtration Membrane Pore Size Analyzer Specifications

1、Usage：

Use gas bubble pressure method to test the bubble point pressure, maximumpore size, averagepore size, most probable pore size, pore size distribution map, gas flux and gas permeability of variousmicro-filtration membrane materials; Able to measure orifice size and distribution

2、Technical Specifications：

2.1 Working medium: compressed air, cylinder gas;

2.2 Flow range：0～50L/min;

2.3 Pressure range：0～600kPa;

2.4 Vacuum infiltration device: it can infiltrate sheet film with diameter of 5~70mm, tubular filmwithdiameter of 5~70mm and length of 5~100mm; it has the function of displaying vacuumdegreeandinfiltration time;

2.5 Special specification sample cell can be customized, suitable for irregular samples;2.6 Fully automatic computer program testing, one-click export of test results;2.7 Voltage (V)： 220;

2.8 Environment temperature (℃) ：4 ～ 40;

2.9 Air supply interface (mm)： 6;

3、Aperture test range：0.08～ 500um

4、System Configuration：

Aperture analyzer host 1 set

data processing software 1 set

test components(sample cell) 1 set

vacuum infiltrator 1 set

G-10 lubricant 4 bottles

End user needs to prepare following accessories: 1 computer, 1 nitrogen cylinder, 1 nitrogenpressurereducing valve

Other supplier products

	Protective Clothing Against Acid and Alkali Tester	Protective Clothing Against Acid and Alkali Tester - Textile and Apparel - standard Standards: GB 24540-2009《protective clothing against liquid...
	Battery Slurry Resistance Tester	Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ...
	Roller Abrasion Tester	Applications: The test roller is clamped by the test arm through the bearing. During the test, the actual use condition of material is simulated b...
	Sharp Tip Tester	Meet the standard: ASTM F963 EN 71-1 ISO 8124-1 Product Introduction: Certain points on toys, if excessively sharp, can cause injuries. Safe...
	Dry and wet state reverse reflection coefficient tester	Product Information: Dry and wet state reverse reflection coefficient tester is used to simulate the evaluation of the reflective performance of...

供应产品

Same products

	Plastic Smoke Density Tester F313	卖方: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	卖方: 上海千实精密仪器	Product details Furniture flammability tester is mainly used to test the combustion performance ...