Mask combustion tester EN 149 GB 19083-2010

Standards:

GB 19083-2010. EN 149. GB 2626. YY 0469

Product Information:

Mask combustion tester is to determine the fire resistance performance of medical face masks and full face masks. The tester can provide a specific flame and make the dummy head with facepiece move to the flame under a specific speed. The operator can observe the effects of the flame on the masks and facepiece. The tester is suitable for medical face mask, respiratory protective equipment and full face masks.

Mask combustion tester Application:

Mask combustion tester is a special test instrument for flame retardant performance of medical masks, to test the flammability performance of medical mask after contacting with flame at a certain linear speed.

Scope:

It is the special test equipment mainly used for testing medical masks flame retardant properties.

Feature：

Adjustable burner height with automatic timer.

Equipped with flame temperature measuring device.

Automatic ignition system.

Mask combustion tester Main feature:

1. PLC + touch screen control system; make test more convenient operating, visualization;

2. mask fixture for the metal body head mold, can fully simulate the actual use of the state mask.

3. the burner height can be adjustable

4. automatic timing positioning made by the burner

5. burning time, fire-retardant time are automatically recorded, show the figures.

6. with a flame temperature measurement probe, flame temperature display.

7. automatic control system, automatic ignition;

8. the burner with propane (liquefied gas) and other combustible gas interface.

9. automatic timing, automatic storage of test data; easy access to experimental reports

Specifications:

1. head mold automatic movement line with the speed of (60 ± 5) mm / s

2. the height of the flame can be adjusted to 40 ± 4mm

3. with a flame temperature measurement detection thermocouple

4. the flame from the top of the burner height is(20 ± 2) mm, the temperature is (800 ± 50) ℃

5. The distance between the top of the burner and the lowest point of the mask is (20 ± 2) mm

6. the burner height adjustment range of 30mm

7. metal head mold wall thickness of 2 ~ 3mm, resistant to flame burning

8. continued burning time and smoldering time timer: 0 ~ 9999.9 seconds, accuracy: ± 0.1 seconds

9. the power supply: AC220V, 50Hz, 50W

10. Weight: about 30kg

Other supplier products

	Flame retardant paper and board burning tester	Flame retardant paper and board burning tester - Other test instrument - standard Product Information: Technical parameters: 1. Ambient temperat...
	Bacterial Filtration Efficiency Tester-G299	Standards: YY 0469-2004 Technical requirements for surgical mask BS EN 14683-2014 Medical face masks - Requirements and test methods ASTM F2100-...
	Pilling assessment viewer	Universal pilling pilling viewer/Pilling Pilling Rating tester By comparing the sample to the standard card under the specified light source to obt...
	Pipes Hydrostatic Testing Machine	Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla...
	Plate thermal conductivity tester	Introduction:Plate thermal conductivity tester isused to test the thermal conductivity of refractory insulation, ceramic fiber, felt, textile, plat...

供应产品

Same products

	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	卖方: 上海千实精密仪器	Product details Furniture flammability tester is mainly used to test the combustion performance ...
	Flame retardant testing machine	卖方: 上海千实精密仪器	Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers...