Mask flame retardant tester EN 149 YY 0469
Standards:
GB 19083-2010. EN 149. GB 2626. YY 0469
Applications:
Mask Flame Retardant Tester is a special test instrument for flame retardant performance of medical masks, to test the flammability performance of medical mask after contacting with flame at a certain linear speed.
Product Information:
Medical face masks flame retardant tester is to determine the fire resistance performance of medical face masks and full face masks. The tester can provide a specific flame and make the dummy head with facepiece move to the flame under a specific speed. The operator can observe the effects of the flame on the masks and facepiece. The tester is suitable for medical face mask, respiratory protective equipment and full face masks.
Scope:
It is the special test equipment mainly used for testing medical masks flame retardant properties.
Feature：
Adjustable burner height with automatic timer.
Equipped with flame temperature measuring device.
Automatic ignition system.
Main feature:
1. PLC + touch screen control system; make test more convenient operating, visualization;
2. mask fixture for the metal body head mold, can fully simulate the actual use of the state mask.
3. the burner height can be adjustable
4. automatic timing positioning made by the burner
5. burning time, fire-retardant time are automatically recorded, show the figures.
6. with a flame temperature measurement probe, flame temperature display.
7. automatic control system, automatic ignition;
8. the burner with propane (liquefied gas) and other combustible gas interface.
9. automatic timing, automatic storage of test data; easy access to experimental reports
Specifications:
1. head mold automatic movement line with the speed of (60 ± 5) mm / s
2. the height of the flame can be adjusted to 40 ± 4mm
3. with a flame temperature measurement detection thermocouple
4. the flame from the top of the burner height is(20 ± 2) mm, the temperature is (800 ± 50) ℃
5. The distance between the top of the burner and the lowest point of the mask is (20 ± 2) mm
6. the burner height adjustment range of 30mm
7. metal head mold wall thickness of 2 ~ 3mm, resistant to flame burning
8. continued burning time and smoldering time timer: 0 ~ 9999.9 seconds, accuracy: ± 0.1 seconds
9. the power supply: AC220V, 50Hz, 50W
10. Weight: about 30kg
在线联系供应商
Other supplier products
 |
Shoe Flexing Tester | Product Introduction: Finished shoes bending testing machine Finished shoes bending testing machine Test shoes, casual shoes, work shoes and other... |
 |
Metal Angle Fixators Tester | Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and ben... |
 |
Pump and Valve Contamination Tolerance Tester | Meet the standard: ISO 4406 ISO 18413 ISO 10707 ISO 6403 ISO 10372 NFPA T2.6.1 Product Introduction: Solid particle contamination is a major... |
 |
Tube Dropping Impact Tester | Tube Dropping Impact Tester - Material and Parts of Automotive - standard Standards: GB / T14152-2001 "Thermoplastics pipes-Determination of re... |
 |
Molten Metal Penetration Resistance Tester | Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
