.

Point-to-point Resistance Tester EN 1149?1?1995 GB/T 1410?2006

Standards

GB12014-2009. GB/T 1410-2006. ASTM D257-99. GB/T 10581?2006. GB/T 1692?2008. GB/T 2439?2001. GB/T 12703.4?2010. GB/T 10064?2006. GB/T 22042?2008. EN 1149?1?1995. GB/T 1410?2006.

Introduction

The point-to-point resistance tester is used to detect the point-to-point resistance rate of anti-static work clothes, which is suitable for class A and b-class anti-static work clothes. The principle is to add test voltage 100 V to test samples for total 15 s. The weak current flowing through the sample is sampled and amplified by the standard resistance and read on the high impedance meter. The figures show the resistance value directly, with high accuracy, quick display, good stability and easy reading.

Operation Principle

According to ohm's law, the tested resistance Rx is equal to the applied voltage V divided by the current I. The traditional high impedance meter works by measuring the fixed voltage V, and the resistance value is get by measuring the current I that flows through the sampling resistor. As can be seen from the ohm's law, since the current (I) is inversely proportional to the resistance rather than directly proportional, so the display value of resistance is nonlinear. Namely when the resistance is infinite, the current is zero, and the zero level at the header is ∞. The scale interval is very close with a very low resolution, so the whole scale is nonlinear. The voltage V also changes due to the measurement of different resistance, so the normal high resistance meter is low in accuracy with low resolution.

The point-to-point resistance tester measures the voltage V at the two ends of the resistance and the current I flowing through the resistor at the same time. Through the large scale integrated internal circuit, the calculation of voltage divided by the current is completed. Then, the results obtained through A/D conversion shows digital resistance value. Even though the voltage V at the two ends of the resistance and the current I flowing through the resistor change at the same time, the displayed resistance value will not change like the ordinary high resistance meter subject to the change of the tested voltage V and the current I. So, even if the measured voltage, the measured resistance and power voltage change, it has a little influence on the results. The accuracy is very high (patent), and theoretically the error can be zero, and the actual error can achieve parts per thousand or parts per ten thousand.

Technical Parameters

Items Parameters
Range limit 105Ω-1013Ω
High resistance meter indication error ±1%
Voltage 100V DC
Display mode Digital LCD
Operation environment Temperature: 0-40℃; Relative humidity: 80%
Power supply AC 220V 50Hz, power consumption about 5W
Dimension 252mm*265mm*100mm
Net weight About 5W

在线联系供应商

至: 标准集团
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Shoe Peel Tester
Shoe Peel Tester Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p...
Intervertebral Fusion Cages Shear Fatigue Tester
Intervertebral Fusion Cages Shear Fatigue Tester Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, ...
Schopper folding machine for paper
Schopper folding machine for paper Product Information: Use and Scope of application: 1, the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than ...
Bag plastic plug-in fatigue testing machine
Bag plastic plug-in fatigue testing machine Product Introduction: The machine operates under the technical standard QBT 5247-2018, ensuring that it meets industry requirements for testing. I...
Standard Helmet Visual Field Tester
Standard Helmet Visual Field Tester Standard EN 1078:2023: Helmets for Pedal Cyclists, Skateboarders, and Roller Skaters CE Certification(Conformité Européenne) Equ...
供应产品

Same products

FH-77富氢测试笔
FH-77富氢测试笔 卖方: 科立龙电子股份有限公司 产品说明: 用于测量氢气水(富氢水)和氢气水发生器的溶解氢含量。 特征: 1、电极更换方便 智能、携带方便、操作方便、实用; 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...