Rubber low temperature brittleness testing machine
Product Introduction:
Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample is damaged by impact under specified conditions, that is, the brittleness temperature, which can make comparative identification of the performance of non-rigid plastics and other elastic materials under low temperature conditions, and the advantages and shortcomings of temperature and low temperature performance. Therefore, both in scientific research materials and production process control are indispensable. This instrument is according toGB/T 15256andGB/T5470standard design, the development of compressor refrigeration equipment. The equipment adopts the cascade compressor refrigeration technology, the heat balance principle and the circulation stirring method to achieve automatic uniform cooling and constant temperature of the sample. This equipment is divided into rubber low temperature brittleness testing machine and plastic low temperature brittleness testing machine two kinds.
Standards：
1. ISO812 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
2. GB/T 15256 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
3. JIS-K-6261-2006 Rubber, vulcanized or thermoplastic - Determination of low temperature properties
4. ASTM D2137 Rubber property-Brittleness point of flexible polymers and coated fabrics
Technical parameter:
1. temperature control range: -80℃ (room temperature ≤25℃) (there are -60. -70. -80℃ three models for customers to choose)
2. cooling speed:
0 ℃ —— 1.2 ℃ —— 20 ℃ / min
- 20 ℃ —— 1.0 ℃ to 30 ℃ / min
- 30 ℃ —— 0.7 ℃ to 60 ℃ / min
-40℃——-60℃ about 0.7℃/min
-60℃——-80℃ About 0.5℃/min
Note: The use environment is used at room temperature (23-25 ℃)， and the effect of diffusing temperature of the compressor is maintained during work. The side door can be fully opened.
3. after constant temperature, the temperature fluctuation within 3 minutes of the test: < ±0.5℃
4. overall size: 900×505×800mm (length × width × height)
5. the overall size of the studio: 220×170×70mm (length × width × height)
6. cooling medium: ethanol or other non-freezing liquid
7. mixing motor: 15W
8. working power supply 220V——240V,50Hz,2kW
在线联系供应商
Other supplier products
 |
Sliding Bearing Fatigue Testing Machine | Material Research and Development During the research and development of new materials, this testing machine can be used to evaluate the fatigue p... |
 |
Water Leak Detector | Product Description GB/T 21619-2008 Test Methods for Dangerous Goods Flammable Solids Emitting Flammable Gases in Contact with Water, GB 19521.4-2... |
 |
AC/DC High - Voltage Testing Machine for Automotive Wires | Standards ISO 6722, ISO 14572: International standards for automotive cables and electrical continuity. IEC 60529: IP code compliance for dust/... |
 |
Vertical/Horizontal Wire Flame Test Apparatus | This testapparatus(VW-1)is designed according to UL1581 sect 1080.1~1080.14. and meet the criteria of VW-1(Vertical-specimen)FlameTest.It can be us... |
 |
Quilting Products Combustion Rate Tester | Product details Fire hazards exist everywhere in our daily life. In order to reduce fire accidents due to the flame spread of flammable materials ... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
