Syringe Sealing Positive Pressure Tester
Product introduction
The positive pressure tester for syringe cohesion is composed of intelligent manipulator,force measuring mechanism, distance measuring group mechanism, printer and so on.
Among them, the intelligent driver is composed of CPU, motherboard, LCD display screen,keyboard, power supply and other parts. Implement GB 15810 standard requirements,positive pressure test principle, check the syringe's tight fitting performance.
Reference standard
GB/T 15810-2001 "Disposable sterile syringe", YY/T 0909-2013.
Test principle
The syringe is sucked into the nominal capacity of water, with the specified axial pressure and lateral force, the effect on the core rod is 30s, and the part of the jacket and the piston shall not have leakage phenomenon. Under the effect of 88KPa negative pressure, adhere to 60s±5s, the contact part of the jacket and the piston shall not produce air leakage, and the piston and the core rod shall not be separated.
Technical parameters
1. Lateral force: 0.25 — 3.00N, error is not more than ±0.5%
2. Axial pressure: 100 — 400kPa, error is not more than ±2%
3. Nominal capacity: 1 — 200ml, optional
4. Test time: 0 — 9999 seconds, arbitrary setting
5. Working temperature: 5 — 40℃
6. Relative humidity: (45 — 80) %
在线联系供应商
Other supplier products
 |
Room Corner Test Machine, ISO 9705. En 14390 | Introduction According to ISO 9705 of building materials fire prevention performance standards, this machine control platform to provide independe... |
 |
Contact heat transmission test machine | Introduction: This part of ISO 12127 specifies a test method designed to evaluate the heat transfer and the behaviour ofmaterials used for protect... |
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): Def... |
 |
Mask Breathing Resistance Testing Apparatus | Mask & Respirator Breathing Resistance Tester Respirator Breathing Resistance Tester is used to measure the respiratory resistance and expirat... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorpti... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
