Syringe Sealing Positive Pressure Tester
Product introduction
The positive pressure tester for syringe cohesion is composed of intelligent manipulator,force measuring mechanism, distance measuring group mechanism, printer and so on.
Among them, the intelligent driver is composed of CPU, motherboard, LCD display screen,keyboard, power supply and other parts. Implement GB 15810 standard requirements,positive pressure test principle, check the syringe's tight fitting performance.
Reference standard
GB/T 15810-2001 "Disposable sterile syringe", YY/T 0909-2013.
Test principle
The syringe is sucked into the nominal capacity of water, with the specified axial pressure and lateral force, the effect on the core rod is 30s, and the part of the jacket and the piston shall not have leakage phenomenon. Under the effect of 88KPa negative pressure, adhere to 60s±5s, the contact part of the jacket and the piston shall not produce air leakage, and the piston and the core rod shall not be separated.
Technical parameters
1. Lateral force: 0.25 — 3.00N, error is not more than ±0.5%
2. Axial pressure: 100 — 400kPa, error is not more than ±2%
3. Nominal capacity: 1 — 200ml, optional
4. Test time: 0 — 9999 seconds, arbitrary setting
5. Working temperature: 5 — 40℃
6. Relative humidity: (45 — 80) %
Send product request
Other supplier products
 |
5kN Universal Testing Machine 丨5kN Universal Tester | Product Introduction This series of testing machines realizes the automatic control of the test process, data acquisition and analysis through the... |
 |
American European bending test meter | Test Purpose： To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose choking or i... |
 |
Dental Implants Fatigue Tester | Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure... |
 |
Guide pin anchoring force tester | Product introduction The anchoring force test of the guide needle can ensure the anchoring effect of the mammary positioning filament within the t... |
 |
Model Coin-cell Swelling System | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &nd... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
