Zipper Fatigue Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Product Introduction:
The functional life of a zipper is often determined by its ability to withstand numerous opening and closing cycles without failure. A Zipper Fatigue Tester provides a standardized method to assess this characteristic, commonly referred to as reciprocation or cycling resistance.
The test involves mounting a specimen of the zipper onto the tester. The zipper tapes are typically held securely at each end, and a specified lateral or transverse tension (or a combination) may be applied to simulate the stresses encountered in a finished product. The zipper slider is then grasped by a mechanism on the tester. A motorized drive system moves the slider back and forth along the zipper chain, causing the zipper to repeatedly open and close over a defined stroke length.
The instrument is used in laboratories for:
Determining the number of cycles a zipper can withstand before functional failure.
Evaluating the durability and lifespan of various zipper types (e.g., coil, Vislon, metal) and sizes.
Quality control during zipper manufacturing to ensure consistent performance.
Assessing the effect of different materials, designs, or finishes on zipper fatigue life.
Research and development of more durable zipper components and assemblies.
Ensuring zippers meet the performance requirements for the products they will be used in (e.g., heavy-duty applications vs. light apparel).
Meet the standard:
ASTM D2060
BS 3084
JIS S3015
DIN 3416
Product Advantages:
Provides objective, quantitative data on zipper durability under repeated opening and closing cycles.
Essential for predicting the service life of zippers and ensuring product quality and reliability.
Helps ensure zippers maintain smooth operation and structural integrity over time.
Standard compliant test methods (ASTM D2060. BS 3084) are widely used for zipper performance evaluation.
Allows for testing under controlled conditions of tension, speed, and stroke length.
Useful for quality control, product development, and material comparison.
Testers often have multiple stations for efficient testing of multiple samples.
Product Features:
Based on typical Zipper Fatigue Testers:
Mounting fixtures to securely hold the ends of the zipper tapes.
Mechanism to apply controlled lateral tension (pulling the tapes apart) or transverse tension (pulling the tapes away from the midline) to the zipper specimen, or a combination of both, as specified by the standard.
Motorized reciprocating mechanism to drive the zipper slider back and forth along the zipper chain.
Gripping mechanism to attach the tester's drive system to the zipper slider.
Adjustable stroke length to set the distance the slider travels during each cycle.
Adjustable speed control for the reciprocating mechanism, allowing the test to be run at a specified number of cycles per minute.
Digital cycle counter to accurately record the total number of opening and closing cycles performed.
Automatic stop function that halts the test when a predetermined number of cycles is reached or when a failure is detected (e.g., excessive force required to move the slider).
Safety guarding to protect the operator during testing.
Multiple testing stations (common) to allow simultaneous testing of several zipper specimens.
Specification
| Item | Detail |
| Reciprocation stroke | 75mm |
| Running speed | Adjustable |
| Width of lateral clamps | 25mm |
| Combined weight of longitudinal clamps, balances and swivel plate | 0.28kg-~0.34kg |
| Angle α | 30° (specimen open), 60° (specimen closed) |
| Count range | 1-999999 |
| Power supply | 220V 50Hz |
| Dimension | 280mm×550mm×660mm 11.02inch×21.65inch×25.98inch |
| Net weight | 35kg 77.16lb |
在线联系供应商
Other supplier products
 |
Aircraft Seat Performance Test | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This system is applicable to aviation fuel fire testing of materials and compo... |
 |
Automotive Oil Filter Leak Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Oil Filter Hydrostatic Breakage Tester is a test bench independently deve... |
 |
Battery Diaphragm Gas Permeability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Diaphragm Gas Permeability Tester is a precision instrument designed to evaluat... |
 |
Carpet Electrostatic Decay Time Tester IEC 61340 Factory Direct Sale | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Accurately measures human-body electrostatic potential under standa... |
 |
Compression Fatigue Testing Machine | ISO ASTM Material Fatigue Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard (1)YY/T 0959-2014 (China): Specifies compression fatigue testing pr... |
Same products
 |
Custom Stainless Components for OEM Applications | 卖方: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid... |
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
