.

Reciprocating Friction and Wear Testing Machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applicable Standards

ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate the friction coefficient and anti - wear properties of lubricating oils. ISO Standards: Standards like ISO 12156 established by the International Organization for Standardization (ISO) are also applicable to these tests. National Standards: In China, the tests may need to comply with the GB/T series of national standards, which have detailed provisions on testing methods, conditions, data processing, etc. Industry Standards: Depending on specific application fields and testing requirements, certain industry - specific standards are also involved. These standards are developed according to the testing requirements for specific materials or application areas.

Materials Science Research

Research the friction and wear properties of various materials, including metals, non - metals, and composite materials. Provide support for material improvement and optimization based on test data, and drive the research and development of new materials.

Mechanical Engineering Applications

Evaluate the wear resistance of key mechanical components such as engine pistons, gears, and bearings. Predict their service life and performance in actual use, assist in optimizing mechanical designs, and enhance product reliability and durability.

Study the wear resistance of spacecraft materials, simulate friction conditions in extreme environments, assess the abrasion - resistance ability of materials, and ensure the reliability and safety of spacecraft.

Test the wear resistance of automotive components like brake pads, tires, and engine parts. Evaluate their wear - resistance and durability in practical use to improve the quality and performance of automotive products.

In industries such as coatings, plastics, decorative fabrics, automotive interiors, and tufted fabrics, detect the scratch - resistance and wear - resistance properties of materials, providing support for product quality control and performance enhancement.

Technical specifications

Maximum stroke of the actuator: 280 mm

Max. sliding speed: 100 mm/s

Maximum repetition rate: 0.3 Hz

Load range: 20-2500 N

Cyclic load amplitude: Up to 50% of set point

Cyclic load type: Sine or Triangle

Cyclic loading rate: 1 HZ max.

Pneumatic bellows capacity: 420 N/bar

2500 N air pressure: 6 bar

Friction: 0-50N and 0-2000N

Displacement: 0-2.5 mm

Resolution: 1 um

Oil pool: max. temperature 200°C

Data acquisition (high speed): 16 bit resolution at 100 KHz sampling frequency max.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Diaper Anti-Side Leakage Performance Tester
Diaper Anti-Side Leakage Performance Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure the liqui...
Scratch tester STD-KK03
Scratch tester STD-KK03 Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction With the continuous expansion of the use of plastic molding products, from th...
Automotive Seat Headrest and Backrest Static Strength Testing Machine Manufacturer Factory Direct
Automotive Seat Headrest and Backrest Static Strength Testing Machine Manufacturer Factory Direct Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Full-range load capability without gear segmentation; adjustable lo...
Automotive Wire Repeated Bending Tester
Automotive Wire Repeated Bending Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire Repeated Bending Tester is designed to evaluate the durability of autom...
Photography Testing Light Chamber
Photography Testing Light Chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 12233: Compliant with SFR (Spatial Frequency Response) testing for lens resol...
供应产品

Same products

FH-77富氢测试笔
FH-77富氢测试笔 卖方: 科立龙电子股份有限公司 产品说明: 用于测量氢气水(富氢水)和氢气水发生器的溶解氢含量。 特征: 1、电极更换方便 智能、携带方便、操作方便、实用; 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...