Multiphase High - temperature and High - pressure Explosion Limit Tester
Reference Standards:
EN 1839 ASTM E918 ASTM E2079 EN 15967 UL9540A
Product Features:
1. Designed with a modular concept to flexibly meet various testing requirements.
2. Allows for free editing of the experimental process to cater to different testing needs.
3. The testing container is made of 316L stainless - steel, which is corrosion - resistant.
4. It adopts a jacket temperature - control method, featuring high temperature - control efficiency.
5. The constant - temperature conditions can be flexibly set, balancing efficiency and accuracy.
6. Equipped with a high - efficiency vacuum pump, and the cleaning parameters can be set to fully eliminate residual effects.
7. With a precision measurement and control system and a compensation gas - mixing algorithm, it enables precise control of gas concentration.
8. It has a stirring function to ensure the uniformity of the mixed gas.
9. It uses a pressure sensor specially designed for explosions, which can work at high temperatures and has good dynamic performance.
10. Automatic control of gas samples, including automatic vacuum - pumping, automatic gas - mixing, and automatic stirring. 11. The equipment has a safety interlock function to enhance safety.
12. Multiple safety protections such as safety valves and burst discs effectively ensure the safety of experimenters.
Technical parameters:
|
Operating Environment |
(-5 to 45)°C, <95%RH |
|
Test Vessel Temperature Control Range |
Room temperature to 200°C |
|
Configuration Gas Maximum Pressure |
Supports one atmosphere, ±0.1%FS |
|
Test Vessel Design Pressure |
≥2.0MPa |
|
Explosive Pressure Sensor |
≥5.0MPa, linear ±1.0%FS |
|
Explosive Pressure Acquisition System Sampling Frequency |
≥5kHz |
|
Explosive Pressure Acquisition System Single Experiment Data |
≥10.000 cycles |
|
Gas Input Channel |
3 channels |
|
Maximum Stirrer Speed |
400rpm, speed adjustable |
在线联系供应商
Other supplier products
 |
Universal Wear Tester | Standards ASTM Standards: D3514, D3885, D3886 (textile, coating, and plastic wear resistance) AATCC Standards: 119, 120 (fabric abrasion and pi... |
 |
Intramedullary Nails Four - point Bending Fatigue Tester | Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load appl... |
 |
Timken Test Machine | Testing Standards ASTM D 2509 ASTM D 2782 GB/T3142 SH/T0204 Applicable standards Timken extreme pressure friction testing machines are usuall... |
 |
Electric bicycle lighting device test device | Meet the standard: EN 15194 ISO 4210 UL 2849 ECE R50 StVZO Scope of application: Public, inspection, law, accident investigation, fire emergenc... |
 |
Battery impact tester | The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） diameter rod placed in a cross position over the center of the ... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
