Carpet Static Load Tester
Instrument Description
When furniture is moved, imprints are often left at the position of its feet. These imprints will disappear only when the carpet recovers to its original thickness. This instrument provides a convenient and reliable method to imitate such imprints and test the recovery of carpets after being compressed. This instrument applies a heavy load to the sample within a specified time, usually a pressure of 7 kg/cm² for 24 hours, with a stressed area of 6.0 cm², making it easy to place the WIRA digital thickness gauge in the compressed area. This device complies with the requirements of BS 4939 *Determination of the reduction in thickness of carpets after long - term heavy static loading*. The experiment is applicable to all textile carpets with the same thickness and structure, and is also applicable when measuring areas with different thicknesses and structures separately.
Compliance Standards
BS 4939: 1987(1996), ISO3416: 1986 Wools of New Zealand test method 124 Part B
Instrument Features
Simulate the imprints caused by furniture
Meet international standard requirements
Combine the static load tester with the thickness gauge, saving a lot of testing time
Simple, compact and durable
Parameters
-
Static pressure: 7.0 kg/cm² (≈ 0.70 MPa)
-
Loading area: 6.0 cm² (Ø ≈ 27.6 mm circular foot)
-
Load accuracy: ±0.5 % F.S.
-
Dwell time: 1 min – 99 h 59 min (programmable; 24 h is standard)
-
Thickness measurement range: 0 – 50 mm
-
Thickness resolution: 0.01 mm
-
Recovery observation period: up to 24 h (programmable)
-
Frame: anodized aluminum and stainless steel
-
Loading foot: polished stainless steel, interchangeable weights
-
Test bed: 250 mm × 250 mm (accommodates standard carpet tiles)
-
Safety: transparent polycarbonate guard with interlock
-
Controller: 4.3-inch color touch-screen PLC
-
Data export: USB flash drive (CSV format)
-
Power supply: 220 V AC ±10 %, 50/60 Hz, 300 W
-
Dimensions: 450 W × 480 D × 650 H mm
-
Net weight: ≈ 45 kg
-
Operating temperature: 15 °C – 35 °C
-
Relative humidity: 20 % – 80 % RH, non-condensing
在线联系供应商
Other supplier products
 |
Safety Helmet Flammability Tester | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, ea... |
 |
" Microcomputer-controlled High-temperature Friction Testing Machine " | Main Purposes The microcomputer - controlled high - temperature friction testing machine is a device specifically designed for testing the frictio... |
 |
Rubber low temperature brittleness tester | Standards： 1. ISO812 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness 2. GB/T 15256 Rubber, vulcanized or therm... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorpti... |
 |
Safety Helmet Impact Acceleration Tester | Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p... |
Same products
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
|
|
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | 卖方: 上海千实精密仪器 | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
