Carpet Static Load Tester

• 

Instrument Description

When furniture is moved, imprints are often left at the position of its feet. These imprints will disappear only when the carpet recovers to its original thickness. This instrument provides a convenient and reliable method to imitate such imprints and test the recovery of carpets after being compressed. This instrument applies a heavy load to the sample within a specified time, usually a pressure of 7 kg/cm² for 24 hours, with a stressed area of 6.0 cm², making it easy to place the WIRA digital thickness gauge in the compressed area. This device complies with the requirements of BS 4939 *Determination of the reduction in thickness of carpets after long - term heavy static loading*. The experiment is applicable to all textile carpets with the same thickness and structure, and is also applicable when measuring areas with different thicknesses and structures separately.

Compliance Standards

BS 4939: 1987(1996), ISO3416: 1986 Wools of New Zealand test method 124 Part B

Instrument Features

Simulate the imprints caused by furniture

Meet international standard requirements

Combine the static load tester with the thickness gauge, saving a lot of testing time

Simple, compact and durable

Parameters

• Static pressure: 7.0 kg/cm² (≈ 0.70 MPa)
• Loading area: 6.0 cm² (Ø ≈ 27.6 mm circular foot)
• Load accuracy: ±0.5 % F.S.
• Dwell time: 1 min – 99 h 59 min (programmable; 24 h is standard)
• Thickness measurement range: 0 – 50 mm
• Thickness resolution: 0.01 mm
• Recovery observation period: up to 24 h (programmable)

• Frame: anodized aluminum and stainless steel
• Loading foot: polished stainless steel, interchangeable weights
• Test bed: 250 mm × 250 mm (accommodates standard carpet tiles)
• Safety: transparent polycarbonate guard with interlock

• Controller: 4.3-inch color touch-screen PLC
• Data export: USB flash drive (CSV format)
• Power supply: 220 V AC ±10 %, 50/60 Hz, 300 W
• Dimensions: 450 W × 480 D × 650 H mm
• Net weight: ≈ 45 kg

• Operating temperature: 15 °C – 35 °C
• Relative humidity: 20 % – 80 % RH, non-condensing

Other supplier products

	Geomembrane tear strength tester	Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes to Slow Steady-State Strain) ISO 17548(Geosynthetics - ...
	Plastic Pipe Hydrostatic Pressure Burst Tester	Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla...
	Sliding Bearing Fatigue Testing Machine	Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the re...
	Heel Fatigue Tester	Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel ti...
	G631A electric shoe stripping testing machine	Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p...

Same products

	FH-77 Dissolved hydrogen meter	Seller: Kelilong Electron Co.,Ltd	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...