Medical injection needle puncture force test device
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The needle puncture force simulates the skin tester with a 5.7-inch (120 x 90) single color LCD touch screen, which is displayed in the Chinese menu. Nominal specification, pipe wall, test number, pressure, upward, downward, time, calibration.
The keyboard controls the menu on the LCD screen, and the airborne print test data. Real-time display of puncture force and peak force data can show maximal puncture force and F 5 peak force. The needle puncture force simulates the complete character of the skin tester.
It is designed and manufactured in accordance with the relevant provisions of GB15811 "disposable sterile injection needle".
Standards
GB15811-2016
ISO 17025
Principle
The puncture force of the injection needle was assessed by the maximum peak force measured at the time of the simulated skin using a puncture force test device.
Partial list
1. Main engine
2. Printing paper 1 roll.
3. A set of clamps.
Weight one set.
5. One-year warranty
6. Operation instructions
7. The instrument is free to upgrade service according to national standards.
procedure
Will be needle and simulate the skin in the 22 ℃ plus or minus 2 ℃ for at least 24 h, and at the same temperature test;
The suitable size of the simulated skin clamp on the fixture shall not have any obvious stretching or compression force applied to the simulated skin.
The needle is installed on the device, and its axis is perpendicular to the surface of the simulated skin, and the tip points to the center of the circular puncture zone.
Set the moving speed to 100mm/min.
Start the testing device.
In the process of puncture, the maximum sharp value or record force/displacement diagram was measured simultaneously.
Parameters
Nominal specification: 0.3 ~ 1.2mm;
Test range: 0.10 ~ 5.00N, accuracy: + 0.01N;
Mobile speed: 100mm/min;
(presented) simulated skin: polyurethane membrane material conforms to GB15811 standard;
Printing method: can print 8. 13 or 20 test data and average puncture force and deviation value each time.
Net weight: 11kg dimensions: 400 x 290 * 240 (mm)
在线联系供应商
Other supplier products
 |
Combustion Flue Gas Treatment System Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Parameters UnitSpecification Pre... |
 |
Shoe Shank Stiffness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com This machine evaluates the thermal insulation and moisture permeability performance of the ... |
 |
Bone Plates Static Four-Point Bending Tester | ISO 9585 ASTM F382 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard (1)YY/T 0342-2022: Chinese standard specifying methods for determin... |
 |
Wire AC/DC Current Carrying Temperature Rise and Voltage Drop Testing System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire AC/DC Current-Carrying Capacity Test System is designed to evaluate the... |
 |
Vehicle interior sunshade production equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use this assembly line for the automated production and assembly of au... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
