Catheter Guidewire Friction Test device
Product introduction
The guide wire friction tester is mainly used to measure the friction between the guide wire and the guide wire. This device is of great significance for research and practice in the medical field because it can help doctors understand the movement characteristics of the catheter and guide wire in the human body, so as to optimize surgical procedures and improve treatment results.
Test standard
YY/T1536-2017.ISO 11070
Test principle
The sample is clamped between the two chuck of the fixture, the two chuck do relative movement, and the puncture or opening force test will be carried out through the special chuck. Through the force sensor located on the moving clamp head and the displacement sensor built in the machine, the change of force value and displacement in the test process is collected, and the corresponding force value data is obtained.
Technical parameter
1. Test range: 0-500N (50N, 100N, 200N, 1000N other ranges are optional)
2. Measurement accuracy: 0.5 level
3. Travel: 800mm
4. Test speed: 0.5-500mm/min stepless transmission
5. Displacement accuracy: 0.01mm
6. Sample quantity: 1 piece
7. Chuck size: 0-30mm
8. Shape: 450mm(L)× 500mm(B)× 1500mm(H)
9. Weight: 75kg
在线联系供应商
Other supplier products
 |
Hot Cold Chamber | Features and Benefits 1.Hotcoldchambercan range from very low temperatures ( -70 ° C or lower) to high temperatures (+180 ° C or higher) t... |
 |
G506 Mask Automatic Filter Performance Tester，CE certified mask filtration tester | The latest G506 mask automatic filter performance tester uses the most advanced technology and design concepts, to meet a variety of test standards... |
 |
Initial Adhesion Tester | The initial - tack tester, also known as the initial - tack property tester or adhesive tape tackiness tester, is an instrument specifically used t... |
 |
Thermal Radiation Dripping Test Machine, NF P92-501 | This machine can be used for more than 5mm thickness of rigid and elastic material performance evaluation, and it is developed according to flame t... |
 |
Touch Haptics Test System，Automotive interior material tactile perception quality testing program system | The Touch Haptics Test System is a precision laboratory instrument designed to evaluate the tactile perception and haptic quality of automotive int... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
