Catheter Guidewire Friction Test device
Product introduction
The guide wire friction tester is mainly used to measure the friction between the guide wire and the guide wire. This device is of great significance for research and practice in the medical field because it can help doctors understand the movement characteristics of the catheter and guide wire in the human body, so as to optimize surgical procedures and improve treatment results.
Test standard
YY/T1536-2017.ISO 11070
Test principle
The sample is clamped between the two chuck of the fixture, the two chuck do relative movement, and the puncture or opening force test will be carried out through the special chuck. Through the force sensor located on the moving clamp head and the displacement sensor built in the machine, the change of force value and displacement in the test process is collected, and the corresponding force value data is obtained.
Technical parameter
1. Test range: 0-500N (50N, 100N, 200N, 1000N other ranges are optional)
2. Measurement accuracy: 0.5 level
3. Travel: 800mm
4. Test speed: 0.5-500mm/min stepless transmission
5. Displacement accuracy: 0.01mm
6. Sample quantity: 1 piece
7. Chuck size: 0-30mm
8. Shape: 450mm(L)× 500mm(B)× 1500mm(H)
9. Weight: 75kg
Send product request
Other supplier products
 |
Battery Electrode Resistance Tester | Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ... |
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Carbon Arc Aging Chamber | Carbon arc aging chamber is mainly used to simulate the destructive effects of ultraviolet rays, temperature, humidity and other factors in natural... |
 |
SI80 Carbon Arc Aging Tester | Applications： Material Science: Accelerated aging tests for polymers, coatings, and textiles. Automotive Industry: Validation of exterior compone... |
 |
Laminoplasty Plate System Fatigue Testing Machine | Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Defines ... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
