Battery Powder Compaction Density Measurement System
Standard
Engineered to comply with global testing standards (ISO 3953.ASTM B527), our Powder Tapped Density Analyzer provides certified results for quality control in pharmaceuticals, batteries, ceramics, and additive manufacturing. Meets CE/UL safety certifications for laboratory equipment.
Product Advantages
Unparalleled Precision
Dynamic Tapping Mechanism: Programmable tapping cycles (1–3000 taps) with adjustable amplitude (1–50 mm) to simulate industrial compaction processes.
High-Resolution Sensing: Laser-based volume detection (±0.01 cm³ accuracy) captures subtle density changes in micro-powders.
Automated Workflow
One-Touch Operation: Preset protocols for pharmaceutical USP methods or custom tapping sequences. Automatically calculate Hausner Ratio and Carr Index.
Real-Time Curve Generation: Plot density vs. tap count, pressure, and environmental conditions (temperature/humidity) during testing.
Material Versatility
Optimized for:
Battery electrodes (Li-ion, Na-ion, solid-state)
Pharmaceutical excipients and APIs
3D printing powders (metal, ceramic, polymer)
Abrasives, catalysts, and food additives
Data Integrity
21 CFR Part 11-compliant software with audit trails, electronic signatures, and encrypted data storage. Export reports in PDF/Excel formats.
Calibration Assurance
Pre-installed NIST-traceable density standards (1 g/cm³, 2.5 g/cm³) for instant verification.
Product Features
Pressure Control: Closed-loop hydraulic system applies up to500 MPawith ±0.1% FS stability.
Environmental Monitoring: Integrated sensors for temperature (-10°C to 80°C) and humidity (5–95% RH) with automatic drift correction.
Modular Design: Swapable testing cells (1–500 cm³) for R&D to production-scale samples.
Safety: Overpressure protection, emergency stop, and HEPA-filtered dust containment.
Connectivity: Wi-Fi/Bluetooth for remote monitoring, compatible with LIMS systems.
Accessories
Main Unit: Powder Tapped Density Analyzer with safety enclosure.
Software Package: Compliance-ready SPC software with FDA 21 CFR Part 11 modules.
Testing Kits:
Set of 3 stainless-steel density cells (10 cm³, 50 cm³, 250 cm³).
Calibration weights (100 g, 500 g) with certificate.
Dust Management: HEPA filter unit and anti-static brush.
User Documentation: Multilingual quick-start guide and maintenance manual.
Technical Parameters
| Parameter | Specification |
|---|---|
| Tapping Range | 1–3000 taps (adjustable speed: 10–60 taps/min) |
| Density Measurement | 0.1–5.0 g/cm³ (±0.005 g/cm³ accuracy) |
| Pressure Application | 0–370 MPa (programmable ramp rates) |
| Temperature Control | -10°C to 80°C (±0.2°C stability) |
| Humidity Tolerance | 5–95% RH (non-condensing) |
| Display/Interface | 10.1" touchscreen with multi-language GUI |
| Power Consumption | 600 W (110–240 V AC, 50/60 Hz) |
| Dimensions (W×D×H) | 500 × 600 × 800 mm |
在线联系供应商
Other supplier products
 |
Aerosol Foams Flammability Test device | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi... |
 |
Smoke Density Test Machine for Building Material, ASTM D2843 | Introduction: In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires,smoke ... |
 |
Print friction tester | Product Introduction: Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products ... |
 |
Thermal Insulation Material Smoldering Tester | Product Introduction: Thermal insulation material smoldering test furnace is a performance test device, using intelligent touch screen control sys... |
 |
Coatings Shear | Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bendi... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
