Glove Cut-Proof Performance Tester (for Glove Cut Resistance Tester)
Product Introduction:
The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure the cutting resistance of gloves. Widely used in fire research institute, fire gloves production enterprises, national quality inspection units.
Main technical parameters:
1. blade: stainless steel blade, hardness is not less than HRC45. the cutting edge length should not be less than 65mm, the width should not be less than 18mm, the thickness of (1.0±0.5)mm, the width of the blade bevel is (2.5±0.2)mm, the Angle of the cutting edge is 22°
2. weight bracket: the sum of its quality and blade quality should not be greater than 200g
3. Tool holder: The Angle between the blade plane and the long shaft of the sample fixture is (90+2)。 The Angle between the cutting edge and the short shaft of the sample fixture is (90+2)。
4. sample fixture: the surface of the arc type of metal fixture, arc radius of (38±05)mm, length should not be less than 110mm, width should not be less than 32mm
5. support frame: can ensure that the sample fixture at the specified rate along the direction of the blade edge
dynamic
6. sample size :50mmx50mm
7.Power supply :AC220V 50Hz 4kW
Meet the standard:
GB/T8965-2009 "Protective clothing flame retardant protection Part 1 Flame retardant clothing"
GA7-2004 Fire gloves
在线联系供应商
Other supplier products
 |
Ink Printing Sample Press / Ink Printing Trial Press | How it works: Ink printing proof machine is mainly based on the principle of printing reproduction, through the simulation of the press pressure, ... |
 |
Fiber Crimp Elasticity Tester | Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber. Crimp elasticity, crimp recovery rate index... |
 |
Automotive wire cyclic bending testing machine | StandardThis testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles –... |
 |
multi-finger scratch/mar tester | Standards:GB/T 2918，GB/T 6151，GB/T 8424.3，PV3952，BMW GS97034-2，BMW GS97034-9，GMN 3943-2003，FLTM BN 108-13，STD1024-3113，GMW 14698-A，GMW 14688Product... |
 |
Bone Screw Pull-out Tester | Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
