Building material combustion calorific value calorimeter

Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and polymers and other building materials, the determination of calorific value of fuels, used in building research and technical supervision and other departments.

Standards compliant:

GB / T 14402-2007 "Combustion properties of building materials and articles - Determination of combustion calorific value"

Building materials burning calorific value tester / building materials burning calorific value detector

Main features:

1. This equipment is in the same kind of pre-product developed on the basis of a new type of analytical instruments;

2. Using high-end single-chip, large-screen LCD screen, the entire Chinese user interface;

3. Has a high precision measurement, small size, easy operation, automatic ignition, automatic water, water, mixing, calculation, printing and other characteristics;

4. It is one of the test methods to evaluate whether the combustion performance meets Grade A composite (sandwich) materials is used to determine the total calorific value and the net calorific value.

Building material combustion calorific value calorimeterTest principle:

Under standard conditions, a specific mass of the sample is placed in a constant volume of oxygen and nitrogen calorimeter, the test sample combustion calorific value of the equipment, under standard conditions, the test to test the temperature based on the consideration of all heatLoss, and latent heat of vaporization, calculate the combustion calorific value of the sample.

Main parameters:

1. Measurement principle: Oxygen bomb heat method

2. Measurement time: (30-60) min

3. Temperature resolution: 0.001 ℃

4. Ignition method: short circuit ignition

5. Ignition time: 5s

6. Ignition voltage: DC12V

7. Outside the water tank capacity: about 40L

8. Internal water tank capacity: about 2.1L

9. Test environment: (23 ± 2) ℃ (per room temperature change should be ≤ 1 ℃) Relative humidity (40-60)% RH

Accessories parameters:

Parameter	Value
Power supply	AC220V+10% 50Hz
Total power	500W
Temperature measurement range	5℃~40℃
Systemtemperature measurement accuracy	≤0.2%
Measurement	isothermal
Oxygen bombs	capacity:300ml oxygenation pressure:(3.0~3.2)MPa pressure:water pressure 20MMPa Weight: 2.5Kg

Other supplier products

	Fabric horizontal burning tester	Horizontal Flammability Tester; Mainly used for determining the horizontal burning rate of materials used in the occupant compartment of road vehic...
	Fireproof coatings tester	Sample making: 1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75...
	Steel Structure Fireproof Coating Small Sample Test Furnace	Product Overview TheSmall Sample Test Furnace for Steel Structure Fireproof Coatingis a specialized thermal testing instrument designed to evaluat...
	Thermal Insulation Material Bond Strength Tester	Meet the standard: JGJ144-2004 "External Wall insulation engineering Technical Regulations" JG158-2004 "Rubber powder polystyrene particles exter...
	Thermal Insulation Rock Wool Thermal Load Tester	Introduction： This equipment determines the temperature at which rock wool insulation shrinks under a specified load when heated at a controlled r...

供应产品

Same products

	Plastic Smoke Density Tester F313	卖方: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	卖方: 上海千实精密仪器	Product details Furniture flammability tester is mainly used to test the combustion performance ...