Building material combustion calorific value calorimeter

• 

Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and polymers and other building materials, the determination of calorific value of fuels, used in building research and technical supervision and other departments.

Standards compliant:

GB / T 14402-2007 "Combustion properties of building materials and articles - Determination of combustion calorific value"

Building materials burning calorific value tester / building materials burning calorific value detector

Main features:

1. This equipment is in the same kind of pre-product developed on the basis of a new type of analytical instruments;

2. Using high-end single-chip, large-screen LCD screen, the entire Chinese user interface;

3. Has a high precision measurement, small size, easy operation, automatic ignition, automatic water, water, mixing, calculation, printing and other characteristics;

4. It is one of the test methods to evaluate whether the combustion performance meets Grade A composite (sandwich) materials is used to determine the total calorific value and the net calorific value.

Building material combustion calorific value calorimeterTest principle:

Under standard conditions, a specific mass of the sample is placed in a constant volume of oxygen and nitrogen calorimeter, the test sample combustion calorific value of the equipment, under standard conditions, the test to test the temperature based on the consideration of all heatLoss, and latent heat of vaporization, calculate the combustion calorific value of the sample.

Main parameters:

1. Measurement principle: Oxygen bomb heat method

2. Measurement time: (30-60) min

3. Temperature resolution: 0.001 ℃

4. Ignition method: short circuit ignition

5. Ignition time: 5s

6. Ignition voltage: DC12V

7. Outside the water tank capacity: about 40L

8. Internal water tank capacity: about 2.1L

9. Test environment: (23 ± 2) ℃ (per room temperature change should be ≤ 1 ℃) Relative humidity (40-60)% RH

Accessories parameters:

Other supplier products

	Blankets Flammability Tester	Introduction The test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surfa...
	Thermal Insulation Material Bond Strength Tester	Meet the standard: JGJ144-2004 "External Wall insulation engineering Technical Regulations" JG158-2004 "Rubber powder polystyrene particles exter...
	Building material combustion calorific value calorimeter	Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and ...
	Fire retardant coatings tester tunnel method	Product Introduction: The fire retardant coating flame propagation tester is suitable for testing the flame propagation characteristics of the fir...
	Building Materials Combustibility Test Chamber	Building materialsfire resistance testis a very importantandprofessionaltestin safety engineering. The national standard, GB/T8626-2007. specifies ...

Same products

	FH-77 Dissolved hydrogen meter	Seller: Kelilong Electron Co.,Ltd	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Seller: Standard International Group (HK) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...