SL52/SL62/SL72/SL82/SL92/SL102/SL81 Square reinforcing mesh
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm.
the steel bar after drawing shape as below figure:
- The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45° and is less than 70°, the rib height is from 0.025d to 0.10d.
- includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost.
- Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of panel has single bars, twin bars or combination of single bars and twin bars.
- is contained composition and characteristic mechanical porperties of reinforcing steels.
Table1
Composition of reinforcing steels
Type of analysis |
Chemical composition, % max |
|||||||
All grades |
Carbon equivalent value(Ceq)for standard grades |
|||||||
C |
P |
S |
250N |
500L |
500N |
300E |
500E |
|
Cast analysis |
||||||||
Products analysis |
Table 2
Characteristic mechanical properties of reinforcing steels
Property |
250N(Note1) |
500L(Note1) |
500N |
300E(Seismic) |
500E(Seismic) |
Type of specified value |
Yield Stress(Mpa) RekLRekU |
≥ |
≥500≤750 |
≥500≤650 |
≥300≤380 |
≥500≤600 |
CvL: p=0.95CvU: p=0.05 |
Ratio Rm/Re |
≥1. |
≥1. |
≥1.08-------- |
≥1.15≤1.50 |
≥1.15≤1.40 |
CvL: p=0.90CvU: p=0.10 |
Unitform Elogation Agt(%) |
≥5.0 |
≥1.5 |
≥5.0 |
≥15.0 |
≥10.0 |
CvL: p=0.90 |
Common size of for Austialian Market
Mesh Type and reference number |
Longitudinal bars |
Cross-bars |
Mass for 6 x2.4 m sheets |
Cross-sectional area/m width |
||||
Pitch@mm |
Pitch@mm |
Unit area kg/sqm |
Sheet, kg |
Long'l bars sqmm/m |
Cross bars sqmm/m |
|||
Squre, with edge side-lapping bars |
||||||||
SL102 |
10 x 9.5 + 4 x 6.75 |
200100 |
30 x 9.5 |
200 |
80 |
354 |
354 |
|
SL92 |
10 X 8.6 + 4 X 6.0 |
200100 |
30 x 8.6 |
200 |
66 |
290 |
290 |
|
SL82 |
10 x 7.6 + 4 x 6.0 |
200100 |
30 x 7.6 |
200 |
52 |
227 |
227 |
|
SL72 |
10 x 6.75 + 4 x 5.0 |
200100 |
30 x 6.75 |
200 |
41 |
179 |
179 |
|
SL62 |
10 x 6.0 + 4 x 5.0 |
200100 |
30 x 6.0 |
200 |
33 |
141 |
141 |
|
Squre, without edge side - lapping bars |
||||||||
SL81 |
25 X 7.6 |
100 |
60 x 7.6 |
100 |
105 |
454 |
454 |
We are .
How can we conctrol our products quality for exporting Autralia?
Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3.
Secondly, the panel size tolerances meassure way as:
Notes:
在线联系供应商
Other supplier products
Standard reinforced steel welded mesh for construction | Construction steel mesh is main used on foundation footing construction, building subgrade, flooring slab for loading bearing, dividing wall for ... | |
Steel Wire Mesh | The steel wire mesh is always used on multi-story buildings, bridges, road reinforcement, vetical highway supports, etc. According to the wire di... | |
PPAF R / PPAF C / PPAF V BRC Mesh / reinforcement meshes | Heyou wire mesh factory can supply reinforcement meshes accordance to Normes Francaises NF A 35 016-1996. The material of reinforcement meshes o... | |
Tailored Reinforcing Mesh | Heyou wire mesh factory is not only produce the standard mesh, merchant sheets mesh, eco friendly mesh and flying end mesh but also what do you ... | |
Slab mesh reinforcement for footing slab, beam and piers | The is used on footing construction, beam and piers of waffle rafts. The slab mesh was made by Heyou wire mesh factory accordance with AS NZS... |
Same products
V-shore Frame | 卖方: Suzhou TECON Construction Technology Co., Ltd | V-Shore Frame Conventional Scaffoldingis a high load conventional shoring system consisting of th... | |
Timber Formwork | 卖方: Suzhou TECON Construction Technology Co., Ltd | TECON Timber formworkmainly includes BASE 20 Wall Formwork, Flex 20 Slab Formwork, Slab Table For... | |
Wire Mesh Wholesale | 卖方: STEEL SEARCHER HONG KONG LIMITED | Steel searcher- Wire Mesh main application in hardware custom is "screen, filter, printing, solid... | |
Additive Manufacturing Machine | 卖方: Eplus3D | Renowned as one of the preeminent 3D printing machine manufacturersin China, Eplus3D specializes ... | |
Fashionable Stainless Steel Kitchen Cabinet | 卖方: Guangdong Baineng Home Furniture Co., Ltd | Welcome to modular stainless steel kitchen cabinet factory, a leading manufacturer and supplier o... |