Stainless Steel Blind Flanges
Flange cover, also known as blind flange, is a flange with no holes in the middle for sealing pipe plugs. The function is the same as that of the welded head and the screw cap, except that the blind flange and the wire such as the cap can be removed at any time, while the welded head can not. There are many types of sealing surface, such as plane, convex, concave and convex, tenon and groove surface, and ring connection surface.
Flange cover sealing surface
Plane (FF), protruding (RF), concave and convex (MFM), tenon and groove (TG), ring connection (RJ)
Flange cover production materials
Carbon Steel :ASTM A105,20#, Q235, 16Mn, ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70;
Stainess Steel: ASTM A182 F304、304L、 F316、316L、1Cr18Ni9Ti、0Cr18Ni9Ti、321、18-8；
Alloy Steel: ASTM A182 F1、 F5a、 F9、 F11、 F12、 F22、F91、A182F12、A182F11、16MnR、Cr5Mo、12Cr1MoV、15CrMo、12Cr2Mo1、A335P22、 St45.8/Ⅲ；
Main functions of stainless steel blind flange:
1. Connect pipelines and maintain pipeline sealing performance;
2. Easy to replace a section of pipeline;
3. Easy to disassemble and inspect pipelines;
4. Facilitate the closure of a section of pipeline.
Stainless steel flange, in order to improve corrosion resistance and weldability and appropriate amount of stability elements Ti, Nb, Mo, etc., welding better than chromium stainless steel flange.Use the same type of chromium stainless steel flange welding electrode (G302, G307), should be more than 200℃ preheating and about 800℃ temper after welding.If the welding parts can not be heat treatment, should choose stainless steel flange welding rod (A107, A207).
Other supplier products
|
|
ASTM A501 Hot Formed Seamless Steel Structural Tubes |
Standard : ASTM A 501
Grade: A , B ,
Out Diameter : 30mm-500mm
Wall thickness : 2mm-30mm
Schedules : 10,20, 30, 40,60, Standard (STD), Extra He... |
|
|
Welding Neck Flanges |
Neck flange diameter range: DN10~DN600 Specification: Class 150#, 300#, 400#, 600#, 900#, 1500#, 2500# Size As per customers requirement Face type ... |
|
|
KS D3564 Carbon Steel Pipes For High Pressure Service |
KS D3564 steel pipe dimension table:
KS D 3564 Carbon Steel Pipes for High Pressure Service (Grades:SPPH370, SPPH410, SPPH480
)
Standard: ... |
|
|
Seamless Line Pipe |
Seamless line pipe operating environment of the pipeline, long lines, and not easy to maintain, the quality requirements are very serious.The main ... |
|
|
Cold Formed Welded Structural Hollow Sections |
OD:21-630mm
Wall thickness:3-40mm
Pipe Length: from 6 to 12 m.
Different lengths on request.
Pipe Ends: plain square-cut or bevelled ends for b... |
供应产品
Same products
